650695

Cisco Cisco SPA112 VoIP Manual

10
Zoom out
Zoom in
Previous page
1/136
Next page
Getting Started
Configuration and Management of the ATA
Cisco SPA100 Series Administration Guide 15
1
Using the IVR for Administration
An IVR system is available to help you to configure and manage your ATA. You can use the
telephone keypad to select options and to make your entries.
To access the IVR menu:
STEP 1 Connect an analog phone to the Phone port of the ATA.
STEP 2 Press the star key four times: ****
STEP 3 After the greeting plays, press the keys on the phone keypad to select your options.
STEP 4 Enter the code for the desired action. See the IVR Actions table for details.
TIPS:
• Enter the numbers slowly, listening for the audio confirmation before entering the next
number.
• After you select an option, press the # (pound) key.
• To exit the menu, hang up the telephone or enter 3948# to exit.
• After entering a value, such as an IP address, press the # (pound) key to indicate that
you have finished your selection. To save the new setting, press 1. To review the new
setting, press 2. To re-enter the new setting, press 3. To cancel your entry and return to
the main menu, press * (star).
• While entering a value, you can cancel the changes by pressing the * (star) key twice
within half a second. Be sure to press the key quickly, or the * will be treated as a
decimal point entry.
• If the menu is inactive for more than one minute, the ATA times out. You will need to
re-enter the menu by pressing the star key four times: ****. Your settings take effect
after you hang up the telephone or exit the IVR. The ATA may reboot at this time.
• To enter the decimal points in an IP address, press the * (star) key. For example, to
enter the IP address 191.168.1.105, perform the following tasks:
–Press these keys: 191*168*1*105.
–Press the # (pound) key to indicate that you have finished entering the IP address.
–Press 1 to save the IP address or press the * (star) key to cancel your entry and
return to the main menu.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info