Manual Cisco Cisco SPA112 VoIP (page 9 of 136) (English)

650695

Zoom out

Zoom in

1/136

Getting Started

Configuration and Management of the ATA

Cisco SPA100 Series Administration Guide 14

Configuration and Management of the ATA

You can use the web-based configuration utility to set up your ATA. You also can use the built-

in Interactive Voice Response (IVR) system.

Using the Web-Based Configuration Utility

STEP 1 Connect your computer to the same subnet as the ATA. For example, if the ATA is connected

to a LAN port on your router, also connect your computer to a LAN port on your router.

Note: On SPA122, you can connect your computer to the ETHERNET (Yellow) port of the

ATA.

STEP 2 Power on your computer.

NOTE: Make sure your computer’s Ethernet adapter is set to obtain an IP address

automatically. For more information, refer to the Help for your operating system.

STEP 3 Start a web browser on your computer.

STEP 4 In the Address bar, enter the IP address of the ATA.

• SPA112: Use the ATA’s IVR or your router’s configuration utility to find the

dynamically assigned IP address of the ATA. For information about the IVR, see Using

the IVR for Administration, page 15.

• SPA122: In the Address bar, enter: 192.168.15.1

Note: 192.168.15.1 is the default local IP address of the ATA.

STEP 5 To log in for the first time, enter the default username, admin, and the default password,

admin. The password is case sensitive.

STEP 6 Enter the Connection Type and settings required by your Internet Service Provider. Types

include DHCP (the default option), Static IP, and PPPoE (required for most DSL service).

After entering these settings, click Submit to establish your Internet connection.

STEP 7 Use the menus to configure your settings, as needed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cisco Cisco SPA112 VoIP Manual

Product: