497619
50
Zoom out
Zoom in
Previous page
1/74
Next page
4-14
Cisco ASA 5500 Series Hardware Installation Guide
78-17989-01
Chapter 4 Maintenance and Upgrade Procedures
Installing and Replacing the 4GE SSM
Installing and Replacing the 4GE SSM
The 4GE SSM has four 10/100/1000 Mbps, copper, RJ-45 ports and four optional 1000 Mbps,
Small-Form-Factor Pluggable (SFP) fiber ports.
Note When using the 4GE SSM you can use the same numbered copper ports (RJ-45) and the SFP ports at the
same time. Use the media-type command in interface configuration mode to set the media type to copper
or fiber Gigabit Ethernet. For a complete description of the command syntax, see the Cisco ASA 5500
Series Command Reference.
This section describes how to install and replace the 4GE SSM in the adaptive security appliance, and
includes the following topics:
Overview, page 4-14
Installing the 4GE SSM, page 4-15
Replacing the 4GE SSM, page 4-16
Installing and Removing the SFP Modules, page 4-16
Overview
Figure 4-17 lists the 4GE SSM ports and LEDs.
Figure 4-17 4GE SSM Ports and LEDs
Note Figure 4-17 shows SFP modules installed in the ports slots. You must order and install the SFP modules
if you want to use this feature. For more information on SFP ports and modules, see the “Installing and
Removing the SFP Modules” section on page 4-16.
Table 4-1 describes the 4GE SSM LEDs.
1 RJ-45 ports 5 Status LED
2 RJ-45 Link LED 6 SFP ports
3 RJ-45 Speed LED 7 SFP Link LED
4 Power LED 8 SFP Speed LED
132983
4
1
6
5
7
8
LNK
SPD0123
2
3
Cisco SSM-4GE
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco ASA 5510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco ASA 5510 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info