497619
28
Zoom out
Zoom in
Previous page
1/74
Next page
3-2
Cisco ASA 5500 Series Hardware Installation Guide
78-17989-01
Chapter 3 Installing the Adaptive Security Appliance
Installing the Adaptive Security Appliance
Rack-Mounting the Chassis
Use the mounting brackets to mount the chassis to the front or the back of the rack, with the front panel
or the rear panel of the chassis facing outward. The part number for ordering a rack-mount kit for the
Cisco ASA 5510, Cisco ASA 5520, Cisco ASA 5540, and Cisco ASA 5550 is ASA5500-HW=. To
rack-mount the chassis, perform the following steps:
Step 1 Attach the rack-mount brackets to the chassis using the supplied screws. Attach the brackets to the holes
as shown in Figure 3-1. After the brackets are secured to the chassis, you can rack-mount it.
Note Figure 3-1 shows the rack mounting brackets attached to the rear of the chassis while Figure 3-2
shows the rack mounting brackets attached to the front of the chassis. You can attach the
mounting brackets to the front or the rear of the chassis so that you can have the front panel or
the rear panel of the chassis facing outward. Figure 3-1 shows the brackets attached to the rear
so you can see how that configuration appears while Figure 3-2 shows the brackets attached to
the front so that you can see how that configuration appears. In Step 1 and Step 2, you will
choose to have either the brackets rear mounted or front mounted but not both.
Figure 3-1 Installing the Right and Left Brackets
Step 2 Attach the chassis to the rack using the supplied screws, as shown in Figure 3-2.
191311
191310
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco ASA 5510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco ASA 5510 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info