605005
18
Zoom out
Zoom in
Previous page
1/28
Next page
18
8 Power Up the Router
This section provides the procedures for powering up your Cisco 815 integrated services router.
Caution To ensure adequate cooling, never operate the router unless the cover and all WICs and cover plates are installed.
Checklist for Power-Up
You are ready to power up the Cisco 815 integrated services router after the following steps are completed:
Chassis is securely mounted and grounded. (See the “Install the Router” section on page 9.)
Power and interface cables are connected. (See the “Connect to the Router” section on page 16.)
PC with terminal emulation program is connected to the console port, powered up, and configured for 9600 bps, 8 data
bits, 1 stop bit, no flow control, and no parity.
Suitable PC COM port is selected in the terminal emulation program.
Note For initial power-up, a direct console connection is recommended. After the initial configuration is completed, a remote
modem connection can be used for router management.
Powering Up the Router
Follow these steps to power up your Cisco 815 integrated services router and to verify that it goes through its initialization and
self-test. After the router completes the self-test, it is ready to be configured.
Note Use the back panel LEDs during router installation to confirm that you have correctly connected all the cables to the
router.
Note To view the boot sequence, you must have a console connection to the Cisco 815 integrated services router before it
powers up.
Step 1 Make sure that your PC is powered up and connected as described in the “Checklist for Power-Up” section.
Step 2 Move the power switch to the ON position. The SYS PWR LED on the front of the chassis blinks green. The fans
operate once the router reaches a threshold point temperature. If this does not happen, see the Troubleshooting module
in the online Cisco 815 integrated services router hardware installation documentation at the following URL:
http://www.cisco.com/en/US/products/hw/routers/ps380/prod_installation_guides_list.html
Startup messages appear in your terminal emulation program window. When the startup messages end, the SYS PWR
LED shows solid green.
Caution Do not press any keys on the keyboard until the messages stop and the SYS PWR LED is solid green. Any keys
pressed during this time are interpreted as the first command typed when the messages stop, which might cause the
router to power off and restart. It takes a few minutes for the messages to stop.
If you see the following messages, the router has booted with a configuration file and is ready for initial configuration
using Cisco Router and Security Device Manager (Cisco SDM):
yourname con0 is now available
Press RETURN to get started.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco 815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco 815 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco 815

Cisco 815 Installation Guide - English - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info