588931
8
Zoom out
Zoom in
Previous page
1/38
Next page
8
4. Usage
4.1 Profiles
The
HAC5 offers the possibility to set five different profiles, these are termed in the following as
Bike 1, Bike 2, RDS, Alpine
and Run.
Every profile allows separate settings each, the different functions can be chosen separately for each
profile (and therefore what is displayed).
So if you feel no need for example to display the altitude measurements while running (and thus all
connected functions like slope, performance etc), you can turn off this function under the profile
Run. If the profile Run is activated afterwards, these displays are not shown when going through the
functions.
This means that the number of the possible displayed functions can be determined individually for
each profile and displays not needed can be turned off.
In addition to these profiles there are two sub-profiles, HR-Intv (heart rate-interval) and CAD-Intv.
These can be turned on in addition, meaning that if you choose Bike 1, for example, you can pick the
CAD interval for this setting.
Alpine is the default setting. To switch or pick a profile simply press the two right buttons (UR- and
LR-button) simultaneously.
The profile menu now appears on the display (by pressing the UR- or LR-button all menu points can
be accessed one by one).
Choose the desired profile with the UR-/LR-button and confirm
by shortly pressing the MR-button.
If HR-Intv (heart rate-interval) or CAD-Intv (cadence-interval) is selected, the interval is valid for the
previously chosen profile (example: HAC5 is in profile bike 1. If CAD-intv is selected, then the ca-
dence-interval is active for bike 1).
To check which profile is active at the moment and/or begin transmitter search (which searches for
all transmitters active in the mode concerned), press LL for three seconds.
The display shows the active profile for 10 seconds. During this time, the automatic transmitter
search runs in the background.
4.2 Baro Mode/Alti Mode
The HAC5 is able to switch automatically between measuring the altitude and the barometer. This can
also be switched manually: to do so shortly press UR- and LR-buttons simultaneously in the profile
selection menu, then choose the desired mode with the UR-/LR-button.
Then confirm by shortly pressing the MR-button.
If the altitude doesn’t change for more than 350 metres per hour in the alti mode – for example during
a pause – then the HAC5 automatically switches to the baro mode. The mountain symbol disappears
and the weather symbol appears instead on the display.
The current altitude is saved. Through this altitude automatism, the altitude does not have to be re-
adjusted if air pressure changes occur (during the night or a break for example). If you move up and
down at short intervals again, the HAC5 switches back to the alti mode.
If the baro mode (barometre-mode) is selected, or the alti mode (altitude mode) selected or automati-
cally activated, then the HAC5 switches to that mode in the current setting, this may cause some
functions to not be shown although they are allowed in the profile.
(The baro mode, for instance, does not allow a display of altitude and therefore no display of data ba-
sed on altitude).
4.3 Transmitter search – digital system
In order for the HAC5 to display speed or heart rate or similar, the according transmitter has to be
found first.
The search begins automatically when a recording is started (UL- and LL-buttons pressed simultane-
ously for three seconds), and manually by pressing the LL-button for three seconds (in both cases, the
active profile is shown for 10 seconds).
During this display all transmitters are searched for which are active in this profile. Should no or not all
transmitters be found during this time, then this is displayed when selected, for example: SPD: no TX,
meaning that for the speed (= spd) display there were no transmitters (= tx) found.
Bike1
Bike2
RDS
Alpine
Run
HR-Intv
CAD-Intv
Baro Mode
Alti Mode
Exit
Profile
Alpine
No Interval
Profiles
Baro Mode/Alti Mode
Transmitter search
– digital system
Sunny
cloudy
unsettled (shower)
rainy
SPD: no TX
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo HAC 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo HAC 5 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo HAC 5

Ciclo HAC 5 Additional guide - English - 4 pages

Ciclo HAC 5 Additional guide - German - 4 pages

Ciclo HAC 5 Quick start guide - German - 2 pages

Ciclo HAC 5 User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info