602838

Christopeit WALKER Manual

16
Zoom out
Zoom in
Previous page
1/44
Next page
16
Step 4:
Installation if the extension tube (53) at foot (23) and main frame (1).
1. Put the extension tube (53) with bottom part into appropriate holder of
foot (23) and screw it tightly by using screw M8x50 (63), washer (59) and
self locking nut (61).
2. Fold up the main frame (1) vertically and insert the extension tube’s top
side into the appropriate holder at main frame (1). Screw it tightly by using
screw M8x40 (66), washer (59) and self locking nut (61).
(Note: The connection points shouldn’t tighten too much, so that the ex-
tension tube (53) can move easily during fold up and down the main frame
(1).)
Step 5:
Installation of the handrail (29) on the left (33) and right (24) support
with screws M8x45 (65) and curved washers 8//22 (60).
1. Put one curved washer (60) on each screw (65).
2. Place the hand rail (29) to the upper ends of the supporting pipe (33)
and (24) and bring the above mentioned borings in (29) to rest above the
borings in (33) and (24).
3. Push the screws (65) with washers (60) through the holes and screw in
fi rmly.
Step 6:
Installation of the computer (30) at handrail (29) and drink bottle hol-
der (56) at support (24).
1. Push the ends of the sensor cable (68) (projecting from the support (24))
and sensor wire (31) (from handrail (29)) together
2. Insert the necessary batteries (2xMignon AA 1.5V) in the computer.
3. Place the computer (30) on the computer bracket at the middle of the
handrail (29) and align the holes in the computer with the holes in the bra-
cket.
4. Screw the screws (49) with washers (51) through the holes and tighten
fi rmly.
5. Plug the end of the sensor wire of handrail (31) into the associated so-
cket of the computer (30).
6. Insert the plug of the hand pulse (14) in the likewise corresponding so-
cket of the computer (30).
7. Put the bottle holder (56) at the handlebar support (24); fi x it with two
screws (67) at appropriate position and insert the bottle (55) into the bottle
holder (67).
8. Place the handle cover (27) onto the screw connection of hand rail (29).
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit WALKER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit WALKER in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info