Manual Christopeit Vibro I - 1473 (page 13 of 20) (English, German)

679377

Zoom out

Zoom in

1/20

English

Key Functions:

Power button = Switches the program off.

Input key (P) = Switches the program on

Auto / Fat Scan key (A) = Select button for programs 88-P1-P2-P3-1

Time key = With this button you can set the time in minutes to max.

Enter 10 minutes. For body fat analysis by these key speciﬁcations

gender, age, body size and weight selected.

„+“ = Increases the speed at manual mode. If settings

the values you selected by pressing this button increased.

„-“ = Decreases the speed at manual mode. at defaults are

the values selected by pressing this key decreases.

Programs

88 = Manually program, here you can select a time before press

start key

select speed after press Start key

P1-P2-P3 = automatic programs with the following sequence:

Program 10 9 8 7 6 5 4 3 2 1

min min min min min min min min min min

P 1 6 10 16 14 12 10 8 6 4 2

P 2 6 8 10 14 6 5 4 3 2 1

P 3 10 4 16 4 16 4 10 4 10 4

1 = Program for body fat analysis (BMI (Body Mass Index) deter-

mination)

Select this program and conﬁrm with the

Time button and then enter your gender (1 = Male, 2 = female),

age, height and weight using the „+“

and „-“ keys.

The values is displayed in the time display. Conﬁrm each input

with the time button. Once you have made your entries

the display „---“ appears in the time display and once you

then the sensors on the handle brackets enclose (for 4 Sec.)

Your body fat percentage is displayed in % in the time display.

Table Bodyfat %

Gender too less normal Too much

Female <17 17-27 >27

male <14 14-23 >23

Computer Instruction Vibro l

Display:

Auto / fat / scan = This display indicates which program they are

located.

Time = The training time is speciﬁed in minutes. Is a time set the

display counts the minutes back to zero.

Speed = Shows the level of rapidity of vibration at.

Acoustic signal:

Each press will beep.

A ﬁve-time beep sounds after completing the program

Relaxing massage on the Vibro I

The relaxation massage on the Vibro I provides a noticeable re-

generation.

You can make your physical and emotional states strongly inﬂuence

by listening to relaxing music during training or ﬁll the room with a

soothing scent.

Choose a classical-music or relaxation sounds, use soothing Aro-

ma oils and create an atmosphere in which you harmony and ﬁnd

balance.

Since you should drink plenty before the exercises, provides pre-

viously as a relaxing and afterwards as an invigorating beverage,

a herbal tea to.

The manufacturer and its direct or indirect distribution chain have

strictly and necessarily indicate that the Vibro I, by the end user

with respect should be used. Warranty claims are only guaranteed if

the end users the tips and rules the user manual has followed strictly.

We have strict attention to the manual, the ALWAYS must be reta-

ined with the appliance. We have once again pointed out that the

Vibro I only persons allowed to use the well read and understood

the operating instructions accordingly and precise have. If this is

not the case, we deny any liability.

Introduction

The Vibro I follow the principle of biomechanical stimulation, and in the Sport

Space are used as an exercise area method. Through targeted controlled

vibration acceleration stimuli are on the muscular Transfer system, whereby

the muscle depending on the application can be enabled or implementation

or relaxed. The metabolism can stimulated by the body‘s hormones, which

burning fat and building muscle stimulates and motility increases. The uni-

form oscillations can be of the feet spread and recognized over the spine

up to the ﬁngertips and the internal organs. This allows blood circulation

and lymph ﬂow stimulated, blockades and cramps solved and feelings of

tension be reduced.

Speed

Time

Speed Down

Speed Up

Adjust Ust Time Button

Performance Guide

AUTO/Body Fat

Power Stop Button

Start Button

Auto/Body Button

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit Vibro I - 1473 in the language / languages: English, German as an attachment in your email.

The manual is 2,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit Vibro I - 1473 Manual

Product: