793209

Christopeit TM 650S Manual

19
Zoom out
Zoom in
Previous page
1/56
Next page
19
English
Problem Potenal reasons Soluons
---- The safety lock is removed 1. Put the safety clip in posion
2. Change the safety clip or safety clip socket at computer.
3. If it’s sll not ok, than change the computer.
E01 Communicaon abnormality: abnormal
communicaon between the controller and
the electronic meter aer powering on.
1. Switch o the treadmill and plug out AC cable.
2. Check each secon of communicaon cables from the electronic meter to the controller and ensure
that all cables are well connected.
3. Check whether cables between the electronic meter and the controller are damaged; if yes, replace the
damaged wire.
E02 Voltage-proof protecon: 1. Switch o the treadmill and plug out AC cable
2. Check whether the power supply voltage is less than 50% of the normal value. Please ensurecorrect
voltage and test again.
3. Check whether the controller emits the odor of burning; if yes, replace the controller.
4. Check whether motor cables are well connected; re-connect motor wires.
E03 No sensor signal: 1. Switch o the treadmill and plug out AC cable.
2. Check whether the sensor cable is well plugged or whether it is damaged; plug it well or replace the
sensor.
E05 Over-current protecon: 1. Check whether power supply voltage specicaons is inconsistent or too low and use correct voltage
specicaons for re-test.
2. System self-protecon is triggered under excessive current caused by the excessive load more than
the rated value, or some place of the treadmill is jammed so that the motor cannot rotate; thus, the
system start up self-protecon against excessive current under excessive load; adjust the treadmill and
restart it.
3. Check whether there is over-current sound or burning odor when the motor is running; replace the
motor.
4. Check whether the controller emits abnormal odor; replace it if yes.
E07/E08 EEPROM defect Replace the control board.
Motor
will not
start
The motor cable is damaged or connected
incorrectly.
The fuse on the control board has been
damaged or dropped.
The control board is defect.
The motor is defect.
Check the motor cable.
Check the fuse. Reinsert it, or replace the fuse.
Replace the control board.
Replace the motor.
Meanings of error message codes
In case of malfuncons may adjoining list of error messages help for savvy
people to get funcon back. Basically, electrical repairs only in compliance
with the relevant safety rules which exists. For more informaon and
assistance in case of malfuncons with our service department (contact
details see last page.)
INDOOR TRAININGS APP
The product can be used with the Kinomap app. This enables enter-
taining and interacve training with Android or IOS devices and saving
training data.
Sport, coaching, gaming and eSport are the keywords of the Kinomap
app. This contains many kilometers of real lm material to exercise inside
as if you were outside; Tracking routes and analysis of your performance;
Coaching content; Mulplayer mode; new posts daily; Ocial indoor ra-
ces and more ... The APP thus contains approx. 100,000 videos recorded
by athletes and 200,000 km of accumulated tracks for cycling, running or
rowing for currently approx. 270,000 members from all over the world.
Download the app and connect
Scan the adjacent QR code with your smartphone / tablet or use the se-
arch funcon at the Playstore (Android) or APP Store (IOS) to download
the Kinomap APP. Register and follow the instrucons in the APP.
Acvate Bluetooth on the smartphone or tablet and select the device
manager via the menu in the APP and then select the „treadmill“ catego-
ry. Then select your type designaon via the manufacturer logo „Chris-
topeit Sport“ in order to connect the sports equipment. Depending on
the sports equipment, dierent funcons are recorded by the APP via
Bluetooth or data is exchanged.
Aenon: The Kinomap APP oers a free trial version for 14 days. Aer
that, fees will apply which are listed on the Kinomap homepage. Further
informaon can be found at: hps://www.kinomap.com/en/
IOS AND ANDROID APP
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit TM 650S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit TM 650S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info