793222
23
Zoom out
Zoom in
Previous page
1/76
Next page
23
GB
1. Pull cable 4 (31) through the big hole of leg curler (15)
and connect the end of cable 4 (31) at appropriate holder on
bottom side of leg curler holder (12) by using screw M10x40
(136), washer 10//20 (118) and self locking nut M10 (124) as
showed in gure „C“.
2. Take cable 4 (31) and a cable pulley unit as showed in
gure „B“ with screw M10x80 (114), washer 10//20 (118),
plastic bushing for pulley (95) and nut M10 (124). Insert the
cable pulley (83) with cable pulley cover (84) into the leg curler
(15) and position the plastic bushing (95) from outer side of leg
curler (15).
3. Put a cable roller unit as gure „A“ shows together with
screw M10x45 (110), washer (118) and self locking nut (124),
insert the cable 4 (31) and connect this at cable pulley holder
1(8) in a way that the cable pulley can roll easy.
4. Then put the screw caps for M10 (131) onto all M10 screw
heads and nuts.
Installation of cable 4 for leg curler (31) with cable pulley
units.
STEP 16
1. Put the cable 1 (26) as showed in Step 14 drawing through
the top cross beam (5), screw the screw end of cable 1 (26)
with washer 12//24 (119) into the weight disk bar (40) and
secure the screw with nut. (The cable system can be nely
adjusted on this cable screw. The rope screw must always be
screwed in at least 12mm deep and additionally countered by
the nut.)
2. Take cable 1 (26) and a cable pulley unit as showed in
gure „B“ (without cable pulley cover) with screw M10x70
(112), washer 10//20 (118), plastic bushing for pulley (94) and
nut M10 (124). Insert the cable pulley (83) into the top cross
beam (5), position the plastic bushing (94) from outer side of
top cross beam (15) and screw in tightly.
3. Put a cable roller unit as gure „A“ shows together with
screw M10x45 (110), washer (118) and self locking nut (124),
insert the cable 1 (26) and connect this at top cross beam (5).
4. Take cable 1 (26) and a cable pulley unit as showed in
gure „A“ with screw M10x70 (112), washer 10//20 (118),
plastic bushing for pulley (94) and nut M10 (124) and attach it
at cable pulley holder 2 (6).
5. Then put the screw caps for M10 (131) onto all M10 screw
heads and nuts.
Installation of cable 1 for latissimus (26) with cable pulley
units. Please note following situation regarding the cable
pulley units: The cables have to put on the cable pulleys
(83) and should covered on both sides with cable pulley
covers (84) that the input and output of cable is leaded.
The cable pulley units have to install at the same time
with cables at right position.
STEP 14
1. Connect the both ends of cable 3 (29) with the appropriate
holder at buttery arm left and right (11+14).
2. Put two cable roller units as gure „A“ shows together
with screw M10x45 (110), washer (118) and self locking nut
(124), insert the cable 3 (29) and connect them at cable pulley
holders 1 (8) in a way that the cable pulley can roll easy.
3. Put a cable roller unit as gure „A“ shows together with
screw M10x45 (110), washer (118) and self locking nut (124),
insert the cable 3 (29) and connect this at twin cable pulley
holder (27) in a way that the cable pulley can roll easy.
4. Then put the screw caps for M10 (131) onto all M10 screw
heads and nuts.
Installation of cable 3 for buttery (29) with cable pulley
units.
STEP15
29
27
8
14
11
A
A
29 2690mm
Cable 3
131124
118
84
83
84
118
110
131
A
26
131
131124
118
84
83
84
118
110
131
124
118
94
83
94
118
112
131
6
526
40
119
B
A
A
A
B
A
2600mm
Cable 1
131124
118
84
83
84
118
110
131
A
31
1190mm
Cable 4
15
6
31
BA
C
131
136
118
31
118
124
131
C
131
124
118
95
84
83
84
95
118
114
131
B
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit SP5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit SP5000 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Christopeit SP5000

Christopeit SP5000 Additional guide - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info