663906
15
Zoom out
Zoom in
Previous page
1/60
Next page
15
English
Step 4:
Installation of the handrail (6) and the handrail end piece (7) on the
left (5) and right (4) supports with the screws M8x70, the screws
M8x45 (21), the curved washers 8//16, the washers 8//16 and the
clamps (8).
1. Put one curved washer (22) and one clamp (8) on each screw (21).
2. Plug/place together the pulse cable ends No. 12 and No. 60 projecting
from the hand rail (6) and from the hand rail tail pieces (7).
3. Place the hand rail tail piece (7) at the end of the hand rail (6) (Attention:
Do not squeeze in the pulse cables in doing so) and bore in the parts
in such a way that they are placed on each other. Lead this unit to the
upper end of the supporting pipe (4) and (5) and bring the above
mentioned borings in (69) and (7) to rest above the borings in (4) and
(5).
4. Push the screws (21) through the holes and screw in lightly.
5. Put a washer on each screw (17).
6. Align the holes at the sides of (4) and (5) with those in the handrail
pieces.
7. Push the screws (17) through the holes and screw in firmly. Then
tighten the previously installed screws (21).
8. Push the ends of the cables (13) (projecting from the handrail) and (14)
(from the left support) together.
Step 5:
Installation of the computer (11) on the handrail with the screws
M5x10 (18).
1. Insert the necessary batteries (2xMignon AA 1.5V) in the computer.
2. Place the computer on the computer bracket at the middle of the
handrail (6) and align the holes in the computer with the holes in the
bracket.
3. Screw the screws (18) through the holes and tighten firmly.
4. Plug the end of the computer cable harness of the handrail (13) into the
associated socket on the rear of the computer.
5. Insert the plug of the hand pulse (12) in the likewise corresponding
socket of the computer.
Step 6:
Securing the machine before and after training
1. Before training begins, the machine must be secured with the handgrip
screw (10).
2. For this, the handgrip screw (10) must be pushed through the hole (b)
in the lug of the main frame (1) and screwed into the threaded hole of
the left support (5).
(See drawing A.)
3. After training, the machine must be secured as follows for space-
saving storage.
4. The round handgrip screw (30) and the handgrip screw (10) must be
unscrewed and the main frame (1) folded to the handrail (6).
5. The handgrip screw (10) must be screwed into the threaded hole (a) in
the lug of the main frame (1). The round handgrip screw (30) must be
pushed through the opening in the left support (5) and screwed into
the threaded hole in the main frame (1).
(See drawing B.)
88
88
8
2222
2222
22
2121
2121
21
1212
1212
12
1313
1313
13
1414
1414
14
66
66
6
2525
2525
25
1717
1717
17
1313
1313
13
1414
1414
14
77
77
7
55
55
5
44
44
4
2525
2525
25
77
77
7
99
99
9
1818
1818
18
1717
1717
17
2424
2424
24
1919
1919
19
1111
1111
11
1212
1212
12
1818
1818
18
1313
1313
13
1414
1414
14
66
66
6
3030
3030
30
11
11
1
1010
1010
10
1010
1010
10
55
55
5
55
55
5
1010
1010
10
11
11
1
1010
1010
10
3030
3030
30
1212
1212
12
6060
6060
60
3535
3535
35
BA
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit Runner Pro Magnetic - 9829 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit Runner Pro Magnetic - 9829 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info