585794

Christopeit RUNNER PRO I loopband Manual

17
Zoom out
Zoom in
Previous page
1/48
Next page
17
English
Step 4:
Installation of the computer (49) on the base of computer (50)
with screws M5x10 (61) and washers 5//10 (56).
1. Place on each screw (61) one washer (56) and put them acces-
sibly in front of the foot (2).
2. Place the computer (49) at base of computer (50) and align the
holes in the computer (49) with the holes in the bracket (50).
3. Screw the screws (61) with washers (56) through the holes and
tighten fi rmly.
4. Connect the ends of the computer cable (53) and hand pulse
cables (54)
with the plugs of the computer (49).
5. Place the safety clip (51) in appropriate position onto the com-
puter (49).
Step 5:
Installation of the under prop (52) at bottom frame (2) with the
screws M8x15 (64) and washers 8//16 (59).
1. Place on each screw (64) one washer (59) and put them acces-
sibly in front of the foot (2).
2. Place the under prop (52) against appropriate position in front of
the foot (2) and tight it fi rmly by using the screws (64) with washer
(59).
Step6:
Checks
1. Check the correct installation and function of all screwed and
plug connections.
2. When everything is in order, familiarise yourself with the machine
at a low resistance setting.
Note:
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later.
How to move/store your treadmill:
1. Pull the locking knop (15) and place your hand on the end cap
of the system frame then folding the system frame up and lock it
with locking knob.
2. Place your hands on top of the handrails, than lean the machine
toward your body sideways, this way you can move it easily.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit RUNNER PRO I loopband at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit RUNNER PRO I loopband in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info