582515

Christopeit HT 3 Manual

16
Zoom out
Zoom in
Previous page
1/48
Next page
16
Step 4:
Attach the front post (12) at main frame (32).
1. Attach the front post (12) to the front post mounting tube of main frame
(32) and connect the plug of connection cable (3) to the socket of the
sensor cable (35).
2. Connect the cable of tension control (25) to the bracket of lower section
cable tension (26) (See figure A1-4). Before this step of the installation,
it is advisable to adjust the resistance setting to the highest stage, at
which the cable extends furthest from the sheath. Put the lowest part
of cable (25) into the small hook (figure A 1). Pull it (figure A 2) until the
small hook get in higher position and then insert the cable (25) onto the
bracket (26) (figure A3+A4).
3. Insert the front post (12) to main frame (32) and secure, using allan head
bolts M8x16 (33), spring washers (76) and washers (34).
(Attention: Ensure that the cable loom are not crunched or pinched
during installation.)
Step 5:
Attach the handlebar (10) at handlebar support (12).
1. Guide the preassembled handlebar unit (10) through the upper part of
the handlebar post (12), put the pulse cable (11) through the hole and
close the bracket of handlebar holder.
2. Attach the front handlebar cover (84) at the handlebar holder of handlebar
support (12) and screw the handlebar (10) in desired position at the
handlebar post (12) and tighten firmly with spring washer (5), washer
(6) and handlebar screw (4).
Step 6:
Attach the computer (1) at handlebar support (12).
1. Take the computer (1) that has been supplied out of the packaging and
insert the batteries (Type “AA”-1.5 V pen cells) by watching for the right
polarity on the back of the computer (1). (Batteries for the computer
are not included in this item. Please buy them at your located market.)
2. Place the computer (1) on the computer holder (2) and put the cables
through the computer holder (2) and attach it with the screws (21)
without squeezing the cables.
3. Push the plug of the connecting cable (3) and pulse cable (11) into the
associated socket of the computer (1).
4. Put the computer holder (2) onto the handlebar support (12) and attach
it with screws (22).
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit HT 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit HT 3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info