612687
15
Zoom out
Zoom in
Previous page
1/44
Next page
15
Step 3:
Attach the rear foot (10) with the preassembled end caps (11) to
the main frame. Do this with the two screws (6), washers (7), spring
washers (8) and locking nuts (9).
After assembly has been completed, you can compensate for mi-
nor irregularities in the floor by turning the two adjusting screw
(34). The equipment should be set up that the equipment does not
move of its own accord during a training session.
Step 4:
Screw the right pedal (32) into the locator in the right-hand side (as
seen in operation) for the pedal crank (warning! the screw direction
is clockwise). Screw the left pedal (32a) inti the locator in the left-
hand side (as seen in operation) for the pedal crank (33) (warning!
the screw direction is anti-clockwise).
Then mount the pedal straps left and right on the associated pedals.
Assembly instructionsAssembly instructions
Assembly instructionsAssembly instructions
Assembly instructions
Step 1:
Remove all the separate parts from the packaging, lay them on the
floor and check that all are there on the basis of the packing list in
these instructions for assembly and use. Please note that a number
of parts have been connected directly to the main frame and
preassembled.In addition, there are several other individual parts
that have been attached to separate units. This will make it easier
and quicker for you to assemble the equipment.
Step 2:
Attach the front foot (4) with the preassembled transport rollers (5)
to the main frame. Do this with the two screws (6), washers (7),
spring washers (8) and locking nuts (9).
English
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit GT4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit GT4 in the language / languages: German as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info