612687
16
Zoom out
Zoom in
Previous page
1/44
Next page
16
Step 6:
Push the saddle support tube sleeve (19) over the saddle support tube
(18).
Place the seat pillar (18) into the matching locator in the main
frame (1), set it at the desired position and lock it by inserting the
bolt with the knurled grip (25) in place and doing it up tight.
Take care when doing this, to ensure correct installation, that one
of the holes of the seat pillar (18) lines up with the threaded hole in
the main frame used for the bolt with the knurled grip (25).
Furthermore, you must ensure when setting this desired position
that the seat pillar is not pulled out of the main frame further than
the highest setting position “A”, which is marked in colour.
Step 5:
Push the saddle (20) with saddle bracket (21) into the movable seat
post (22) and tight it up in desired position. Place the movable seat
post (22) into the holder of saddle post (18), set it at the desired
position and screw it onto the fix plate (40) by washer (23) and
movable seat post knob (24).
Step 8:
Insert he end of the Bowden cable of the resistance adjustment
unit (16) projecting from the handlebar support tube (12) into the
receiver of the Bowden cable on the main frame (15) (see 3B – 3D).
The end of the Bowden cable (16) must be screwed as indicated
into the receiver of the Bowden cable (15), pulled upwards and
engaged.
The locator for the Bowden cable (15) has already been adjusted
at the factory. If it is subsequently necessary to adjust it later, if, for
example, the Bowden cables have stretched after a long period of
use, this can be compensated for by means of the adjusting screw
on the Bowden cable (15).
Step 7:
Hold the steering tube (12) with the computer wiring loom (14)
already in place in it. Connect the plug for the computer wiring
loom (14) coming out of the bottom of the steering tube (12) of the
computer with the matching plug for the computer wiring loom (13)
coming out of the main frame (1).
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit GT4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit GT4 in the language / languages: German as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info