793190

Christopeit EMT 2200 Manual

20
Zoom out
Zoom in
Previous page
1/28
Next page
20
GB

Program 16 is a Speed Independent Program. Press „F“ key to select
the values of TIME, DISTANCE, CAL. and WATT.
Then, press (+) or (-) key to adjust the values. Aer pressing „START/
STOP“ key to exercise, please also apply the heart rate detector appro-
priately. During the exercise, the level of loading is not adjustable. In
this program, computer will adjust the level of loading according to the
value of WATT setup.
For example, the level of loading may increase while the speed is too
slow. Also, the level of loading may decrease while the speed is too
fast. As a result, the calculated value of WATT will close to the value of
WATT setup by users. Set exercise parameters with F-key for Time/Dis-
tance/Calories and Pulse.

Program 17 to Program 20 are the Heart Rate Control Programs. In Pro-
gram 17 to Program 19, press „F“ key to select TIME, DISTANCE, CAL.
and AGE. Then, press (+) or (-) key to adjust the values. Users may exer-
cise in a period of me or a certain distance with 55% Max Heart Rate
in Program 17, 75% Max Heart Rate in Program 18, and 95% Max Heart
Rate in Program 19. Aer pressing „START/STOP“ key to exercise, plea-
se also apply the heart rate detector appropriately. In these programs,
the computer will adjust the level of loading according to the heart
rate detected. For example, the level of loading may increase while the
heart rate detected is lower than TARGET H.R. Also, the level of loading
may decrease while the heart rate detected is higher than TARGET H.R.
As a result, the user’s heart rate will be adjusted to close the TARGET
H.R. in the range of TARGET H.R. –5 and TARGET H.R. +5. With the input
of age, the computer may suggest a target heart rate toexercise. The
suggested heart rate is 80% (220 – age).
So, if the heart rate detected equals to or greater than the TARGET
H.R., the value of HEART RATE will keep ashing. Please note that it is a
warning for users to slow down or to lower the level of loading.
In program 20, press „F“ key to select TIME, DISTANCE, CAL. and TAR-
GETH.R. Users may setup a target heart rate to exercise in a period of
me ora certain distance.

In non-exercising status, press F-key to enter body fat parameters set-
ngs. You can set from the below sequence: User No. (1 - 8), height
(120-250CM), gender, age (10-99), weight (20-200KG). Press F-key to
proceed to next parameter seng. Press + key to increase the seng
value while press - key to decrease. When you nish seng, press
START/STOP key and hold the pulse sensor. Then the display will show
your body fat data and your individual body fat program in 10 seconds.
Press START/STOP again to exit body fat test and press again to start
exercising this program.

PROGRAM MANUAL is a manual program. Press „F“ key to select TIME,
DISTANCE or CAL.. Then, press (+) or (-) key to adjust the values. The
default level of loading is 6.
Aer pressing „START/STOP“ key to exercise, please also apply the he-
art rate detector appropriately. Users may exercise in any desire level
(by pressing (+) or (-) during the workout) with a period of me or a
certain distance.

TIME Control: Sets up a period of me to exercise. (5-99Min.)
DISTANCE Control: Sets up a certain distance to exercise. (1-999km)
CALORIE Control: Sets up certain calories to exercise. (10-990kcal)
Set exercise parameters with F-key for Time/Distance/Calories
and Pulse.

PROGRAM 1 to PROGRAM 10 are the preset programs. Press „F“ key to
select TIME, DISTANCE or CAL. Then, press (+) or (-) key to adjust the
values. Users may exercise with dierent level of loading in dierent
intervals as the proles show. Aer pressing „START/STOP“ key to exer-
cise, please also apply the heart rate detector appropriately. Users may
also exercise in any desire level (by pressing (+) or (-) during the work-
out) with a period of me or a certain distance. Set exercise parame-
ters with F-key for Time/Distance/Calories and Pulse.

Program 11 to Program 15 are the user-seng programs. Users are
free to edit the values in the order of TIME, DISTANCE, CAL. and the le-
vel of loading in 10 intervals.
The values and proles will be stored in the memory aer setup. Aer
pressing „START/STOP“ key to exercise, please also apply the heart rate
detector appropriately. Users may also change the ongoing loading in
each interval by pressing (+) or (-) key, and they will not change the le-
vel of loading stored in the memory. With the input of age, the com-
puter may suggest a target heart rate to exercise. The suggested heart
rate is 80% (220 – age). So, if the heart rate detected equals to or grea-
ter than the TARGET H.R., the
value of HEART RATE will keep ashing. Please note that it is a warning
for users to speed down or to lower the level of loading. Set exercise
parameters with F-key for Time/Distance/Calories and Pulse.


Gender/Age Underweight Healthy Slightly Over-
weight Overweight Obese
Männlich/ ≤ 30 < 14% 14%~20% 20.1%~25% 25.1%~35% > 35%
Männlich/> 30 < 17% 17%~23% 23.1%~28% 28.1%~38% > 38%
Weiblich/≤ 30 < 17% 17%~24% 24.1%~30% 30.1%~40% > 40%
Weiblich/ > 30 < 20% 20%~27% 27.1%~33% 33.1%~43% > 43%
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit EMT 2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit EMT 2200 in the language / languages: English, German as an attachment in your email.

The manual is 3.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info