Manual Christopeit EL 8 - 9824 (page 20 of 60) (English, German, Dutch, French)

517218

Zoom out

Zoom in

1/60

Step 7:

Installation of the right (34) and left (28) footrest on the pedal tubes

(21+24).

1. Push the footrest (34) onto the pedal tube (24) so that the bores in

(34) are aligned with one of the possible installation positions in (24).

(Note. The high lip on the long side of the footrest must point inwards

(towards the main frame (1).)

2. Put one washer (29) on each carriage bolt (30) and push through the

bores from the top and fasten from the bottom with the washers

(31), the spring washers (32) and the knob down (33).

(Note. The position adjusted in this way should always be equal at

both sides. The positions can be changed as desired at all times by

removing the carriage bolts (30) and sliding the footrests on the

footrest brackets.)

3. Install the left footrest (28) with all additionally required parts on

the left hand side of the machine as described in 1. + 2.

Step 8:

Installation of the computer (48) and handle bar cover (50+51) on

the handlebar post (15).

1. Put the ends of the computer cable (14) and pulse cable (40) into the

socket at the backside of the computer (48).

2. Push the computer (48) onto the plate at the upper end of the

handlebar post (15).

(Note: When pushing on the computer, thread the cables in the

bores of the handlebar post (15) so that the cables cannot be

trapped.

3. Put the front and back handlebar cover (50+51) onto the upper end

of handlebar post (15) together and fix them with screws (37+38).

Step 9:

Attach the power

1. Please insert the plug of adaptor (52) to the jack of chain guard.

2. Please insert the adaptor (52) to the jack of wall power.

Step 10:

Checks

1. Check the orderly installation and function of all bolted and plug

connections. Installation is then complete.

2. When everything is in order, familiarise yourself with the machine at

a light resistance setting and make the individual adjustments of the

footrests (28) and (34).

Note: Please keep the tool set, the puller and the instructions carefully

because these may be required later for repairs or spare parts orders.

If you ever remove the covers (10) and (11), observe that these are

attached not only outwardly with the screws (64+65), but also inwardly

at the rear end of the cover with the screws (65).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit EL 8 - 9824 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit EL 8 - 9824 Manual

Product: