517218
19
Zoom out
Zoom in
Previous page
1/60
Next page
19
Step 4:
Installation of the small handle bar (43) with small handlebar bra-
cket (44)
on handlebar post (15).
1. Place the small handlebar bracket (44) on the small handle bar (43)
in such a manner that the bores in the bracket and those at the end
of the handlebar are aligned.
2. Place the whole assembly against the upper end of the handlebar
post (15) through the thread bolts and tighten it with washer (45)
spring washer (32) and self lock nut (46) firmly.
(Note: The handle bar must be aligned so that it is inclined away
from the handlebar post (15).)
3. Put into the each end of small handlebar (43) one end cap (47).
Step 5:
Installation of the right and left pedal tube (21+24) with swivel tube
(26)
on the left and right handle bar (18+20) and cross frames (22+104).
1. Push the end of the right pedal tube (24) onto the cross frame (22)
and tighten it with screw (23), washer (16) and spring washer (6) at
the cross frame (22) firmly.
2. Push the swivel tube (26) into the right handle bar (20) and tighten it
with screws (12), spring washer (6) and washer (27) firmly.
3. Install the left pedal tube (21) with all additionally required parts on
the left hand side of the machine as described in 1. + 2.
Step 6:
Installation of the front and rear pedal cover (35, 36+39) on the
pedal tubes (21+24).
1. Push the rear pedal tube cover (39) onto the connection point of
cross frame (22+104) and pedal tube (21+24) and fasten it with
screw (37).
2. Put each one of left and right pedal front cover (35+36) onto one
connection point of swivel tube (26) and pedal tubes (21+24) together
and fasten them with screws (37+38).
English
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit EL 8 - 9824 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit EL 8 - 9824 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info