Manual Christopeit EL 5 (page 25 of 68) (English, German, Dutch, French)

793036

Zoom out

Zoom in

1/68

English

LEVEL:

Indicates the level of loading selected from LEVEL 1 to LEVEL 24.

TIME/ WATT :

Indicates Time or Watt alternately. The time shows minutes and seconds.

If preset, time counts downwards. Minimum preset 5Min. Range 5-99Min.

The actually power display show in Watt. Preset range 30-350Watt only in

Watt program P16.v Or permanently by pressing the F-key.

RPM/SPEED/KMH:

Indicates RPM or Speed alternately. The RPM display shows the cycle

turnings per minute. The speed display show kilometers per hour. Or

permanently by pressing the F-key.

DIST/CAL:

Indicates Distance or Calorie alternately.

The distance display show kilometer. Preset range 1-999km. If preset

distance counts downwards. The calories display shows kcal. Minimum

preset 10kcal. Preset range 10-990. Or permanently by pressing the F-key.

PULSE :

Indicates the actually pulse heart rate. The whole set of heart rate detector

include 2 sensors each side. Each sensor has 2 pieces of metal parts. The

correct way to get detected is to gently hold both metal parts each hand.

With the good signals picked up by the computer, the heart mark in the

HEART RATE Display shall ﬂash. Range 60-240bpm. If a pulse upper limit

is speciﬁed, the display ﬂashes when the preset value is reached.

TARGET H.R.:

Indicates only one value of TARGET HEART RATE.

LOADING Proﬁles:

There are 10 columns of loading bars, and 8 bars in each column. Each

column represents 1 minute workout (without the change of TIME value),

and each bar represents 3 levels of loading.

Program Graph:

Each graph shown is the proﬁle of the loading in each interval (column). With

the value of TIME counting up, each interval is 1 minute that all the columns

make up 10 minutes. With the value of TIME counting down, each interval is

the value of setup TIME divided by 10. For example, if the time value is setup

to 40 minutes, each interval will be 40 minutes divided by 10 intervals

(40/10=4). Then, each interval will be 4 minutes. The following graphs are

all the proﬁles in the monitor.

• Things You Should Know Before Exercising

The values calculated or measured by the computer are for exercise purpose

only, not for medical purpose.

Programs Selection:

There are 22 programs 1 Manual Program, 10 Preset Programs, 4 Heart

Rate Control Programs, 5 User Setting Programs, 1 Speed Independent

Watt-Program, and 1 Pulse Recovery Measuring.

Computer Instructions

The monitor is designed for programmable magnetic bikes and introduced

with the following categories:

- Key Functions

- About Displays

- Operating Ranges

- Things You Should Know Before Exercising

- Operation Instructions

• Key Functions

There are total 5 keys including START/STOP, FUNCTION(F), UP(+), DOWN(-

), and RECOVERY (TEST).

START/STOP: Starts or stops the program chosen. And, resets the monitor

by pressing and holding for 2 seconds.

FUNCTION (F): Chooses or enters the functions from PROGRAMS, TIME,

DISTANCE, WATT, CAL, TARGET HEART RATE, AGE, and 10 columns. The

chosen function shall ﬂash. Please note that not all the functions can be

selected in every program according to the types of each program. During

exercise, press the F-key to display the functions RPM, watts and calories

or speed, time and distance permanently or alternately.

UP(+): Selects or increases the values of PROGRAMS, TIME, DISTANCE,

WATT, CAL., TARGET HEART RATE, AGE, and 10 columns.

DOWN(-): Selects or decreases the values of PROGRAMS, TIME,

DISTANCE, WATT, CAL., TARGET HEART RATE, AGE, and 10 columns.

RECOVERY(TEST): Starts the function of PULSE RECOVERY.

• About Display

PROGRAM:

Indicates the programs selected from PROGRAM 1 to PROGRAM 20

Manual Program Programm 1 Rolling Program 2 Valley

Programm 3 Fatburn Programm 4 Ramp Programm 5 Mountain

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit EL 5 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit EL 5 Manual

Product: