Manual Christopeit CS3000 (page 15 of 52) (English, German, Dutch, French)

793203

Zoom out

Zoom in

1/52

Lubrication for the running belt

In order to keep the machine in the best condition, please

add some Silicone oil between the running belt and the

running board after 50 hours of use. But the running belt

may slip, if you lubricate too much. To lubricate the belt

please pull the walking belt up and injection the silicon spray

or silicone oil into the gap between belt and walking deck.

(Attention: Too much lubricant can cause the tread to slip.)

Adjusting running belt

You need to adjust the walking belt to the normal position, per

the following steps if it is o󰀨.

a. Set speed at 3-5km.

b. Using the Allen key to adjust the belt tension bolt on the end

cap of the system frame.

c. If you want to move the belt towards left, turn the right

tension bolt clockwise.

d. If you want to move the belt towards right, turn the left

tension bolt clockwise.

e. If you have already done according to the steps above and

it is still not at the good range, then the running belt should be

damaged already, please contact your local dealer for replace-

ment.

Note: Make sure that the running surface is as centered as

possible. Once these moves too far from the center, (about 10

mm) it should be readjusted into the center.

Running belt slips

a. Make sure the walking belt is not too loose.

b. Make sure the motor belt is not too loose.

c. Remove excess lubricant with a cloth.

No light on the Display

a. Check whether the plug is in the socket and whether the

outlet has power.

b. Check that the main switch on the base frame is switched on

and that the safety clip is correctly attached to the computer.

Attention! Always pull out the mains plug when checking the

computer plug connections.

c. Check whether the overload protection has tripped. If

necessary, press the button.

Abnormal noise from the machine:

a. Check if any screw of machine is loose.

b. Check if the motor belt is o󰀨.

c. Check if the running belt is o󰀨.

Note: Please contact your local dealer if you have checked all

the above listed things but the problem is still there.

Cleaning

Use only a less wet cloth for cleaning. Caution: Never use

benzene, thinner or other aggressive cleaning agents for

surface cleaning as this damage caused. The device is only for

private home use and for use suitable indoors. Keep the unit

clean and moisture from the device.

Storage

Fold up the treadmill. Unplug the power cord if you do not

intend to use the device for more than 4 weeks. Choose a dry

storage location in the house. Cover the device to protect it

from discoloration caused by sunlight and dust.

MAINTENANCE AND ADJUSTING

b. c.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit CS3000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit CS3000 Manual

Product: