662743

Christopeit CPS2 Manual

16
Zoom out
Zoom in
Previous page
1/48
Next page
16
Step 7:
Installation of the computer (39) on the computer bracket of the
handlebar support (25).
1. Push the plug of the computer cable harness (54) into the appropriate
socket of the computer (39). Push the plugs of the pulse measuring
unit (44) into the appropriate sockets of the computer and push the
computer onto the computer bracket.
(Note: when pushing on the computer, ensure that the cable harnesses
are not trapped. Insert the necessary batteries (2xMignon 1.5V AA) in
the battery compartment located on the rear of the computer.)
Step 8:
Checks
1. Check the correct installation and function of all screwed and plug
connections.
Installation is thereby complete.
2. When everything is in order, familiarise yourself with the machine at a
low resistance setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these may be
required for repairs or spare parts orders becoming necessary later.
Computer instructions for 9912
The supplied computer allows the most convenient training. Every value
relevant to training is displayed in the window.
From the beginning of the training session, the required time, the current
speed, the approximate calory consumption, the travelled distance ad the
current pulse rate are displayed. All values are counted from zero upwards.
The computer is switched on by briefly pressing the F key or simply by
beginning training.
To start the computer, simply begin training. The computer begins to register
and display all values.
To stop the computer, just stop training. The computer stops all measure-
ments and retains the last attained values. The last attained values in the
functions TIME, CALORIES and KM are stored and training can continue
with these values when training is resumed.
The computer switches of automatically approx. 4 minutes after training is
stopped. All previously attained values are deleted.
Displays:
With the “F” key, the individual functions can be selected and the associated
data displayed in the window. The selected function is indicated by an icon
in the window beside the printed name of the function.
1. “PULSE” display:
The current pulse rate is displayed in beats per minute. Particular values
cannot be specified.
The values last attained by this function are not stored.
(Limit of both displays: 240 pulse beats per minute.)
(Note: For pulse measurement, the two contact surfaces of the pulse
measuring handle unit (19) must be gripped simultaneously. The contact
surfaces should be located centrally in the palms of the hands.
2. “TIME” display:
The currently required time is displayed in minutes and seconds. A particu-
lar value cannot be specified.
The values last attained by this function are not stored.
(Limit of the display: 99.59 minutes.)
3. “KM/H” display:
The current speed is displayed in kilometres per hour. A particular value
cannot be specified.
The values last attained by this function are not stored.
(Limit of the display: 99.9 km/h.)
4. “CALORY” display:
The current status of the consumed calories is displayed. A particular value
cannot be specified.
The values last attained by this function are not stored.
(Limit of the display: 999,9 calories.)
5. “KM” display:
The current status of the travelled distance is displayed. A particular value
cannot be specified.
The values last attained by this function are not stored.
(Limit of the display: 999,9 km.)
6. “SCAN” function:
If this function is selected, the current values of all functions are displayed
successively in a constant sequence approx. every 5 seconds.
Key functions:
1. “F” key
By pressing this key once briefly, it is possible to change from one function
to another. The associated values are then displayed in the window.
If the key is held longer (approx. 3 seconds), all last attained values are
deleted with the exception of the values in the “KM TOTAL” display.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit CPS2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit CPS2 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info