Manual Christopeit CPS 3.3 - 99131 (page 15 of 44) (English, German, Dutch, French)

517201

Zoom out

Zoom in

1/44

English

Step 3:

Installation of saddle (24) at saddle support (30) by using saddle slide

(25).

1. Push the saddle (24) with saddle bracket into the movable saddle slide

(25) and tight it up in desired position.

2. Place the movable seat post (25) into the holder of saddle post (30), set

it at the desired horizontally position and tighten it by washer (28) and

movable seat knob (29).

Step 4:

Installation of the saddle support (30) on the main frame (23) with the

rapid-action lock (32).

1. Insert the saddle support (30) into the provided holder of the main frame

(23) and secure at the desired position by screwing in the rapid-action

lock (32).

(Note: To screw in the rapid-action lock (32), the threaded hole in the

main frame (23) and one of the holes in the saddle support (30) must be

aligned. Furthermore, ensure that the saddle support (30) is not pulled

out of the main frame beyond the marked maximum Position. The setting

of the saddle post can be adjusted as desired later. For this, the rapid

action catch (32) must be loosened by only a few revolutions, the cap

of the lock must be pulled away and the saddle adjusted. Then secure

the new setting by tightening the rapid action catch.

Step 5:

Installation of the handlebar (14) and computer (1) on the handlebar

support (11).

1. Guide the preassembled handlebar unit (14) through the upper part of

the handlebar post (11) and close the bracket of handlebar holder (10).

2. Attach the front handlebar cover (7) at the handlebar holder (10) of

handlebar support (11) and screw the handlebar (14) in desired position

at the handlebar post (11) and tighten ﬁ rmly (14) with spacer (8) and

handlebar screw (9).

3. Take the computer (1) that has been supplied out of the packaging and

insert the batteries (Type “AAA”-1.5 V pencells) by watching for the right

polarity on the back of the computer (1). Push the plug of the connecting

cable (2) projecting from the handlebar support (11) into the associated

socket of the computer (1).

4. Attach the monitor (1) to top monitor bracket of front post (11) with

screws (84).

5. Push the plug of the pulse cable (16) projecting from the handlebar (14)

into the associated socket of the computer (1).

6. Put the back handlebar cover (5) with front handlebar cover (7) together

and tighten them with screws (4+6) to one unit and at handlebar support

(11).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit CPS 3.3 - 99131 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit CPS 3.3 - 99131 Manual

Product: