Manual Christopeit BT2 - 1205 (page 16 of 44) (English, German, Dutch, French)

644080

Zoom out

Zoom in

1/44

Step 4:

Attach the computer (1) at handlebar support (68).

1. Put the plug of the connecting cable (67) projecting from the handlebar

support (68) into the computer connection cable (2).

2. Put the plugs of the pulse cables (74) projecting from the handlebar (73)

into the pulse connection cables (3).

3. Place the computer (1) on the plate provided for it on the handlebar

support (68) and attach it with the screws (69).

Step 5:

Installation of saddle (9), saddle slide (10) saddle support (15).

1. Push the saddle (9) with saddle bracket into the movable saddle slide

(10) and tight it up with washer (11) and nut (80).

2. Place the movable seat slide (10) into the holder of saddle post (15), set

it at the desired horizontally position and tighten it by washer (12) and

movable seat knob (13).

3. Insert the saddle support (15) into the provided holder of the main fra-

me (43) and secure at the desired position by screwing in the rapid-

action lock (66).

(Note: To screw in the rapid-action lock (66), the threaded hole in the

main frame (43) and one of the holes in the saddle support (15) must be

aligned. Furthermore, ensure that the saddle support (15) is not pulled

out of the main frame (43) beyond the marked maximum position. The

setting of the saddle post can be adjusted as desired later. For this,

the rapid action catch (66) must be loosened by only a few revolutions,

the cap of the lock must be pulled away and the saddle adjusted. Then

secure the new setting by tightening the rapid action catch.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit BT2 - 1205 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit BT2 - 1205 Manual

Product: