644080

Christopeit BT2 - 1205 Manual

15
Zoom out
Zoom in
Previous page
1/44
Next page
15
English
Assembly Instructions
Remove all the separate parts from the packaging, lay them on the
floor and check that all are there on the basis of the step drawings in
these instructions for assembly and use. Please note that a number
of parts have been connected directly to the main frame and preas-
sembled. In addition, there are several other individual parts that have
been attached to separate units. This will make it easier and quicker
for you to assemble the equipment.
Step 1:
Attach the stabilizer (31+77) at main frame (43).
1. Attach the front foot (77) with the preassembled transport rollers (75) to
the main frame (43). Do this with the two screws (78), curved washers
(45) and spring washers (6).
2. Attach the rear foot (31) with the preassembled eccentric caps (29) to
the main frame (43). Do this with the two screws (30), curved washers
(45), springwashers (6) and cap nuts (44). After assembly has been
completed, you can compensate for minor irregularities in the floor by
turning end cap (29). The equipment should be set up that the equip-
ment does not move of its own accord during a training session.
Step 2:
Attach the front post (68) at main frame (43).
1. Hold the handlebar support (68) with the computer cable (67) against
the main frame holder. Connect the plug for the computer cable (67)
coming out of the bottom of the handlebar support (68) of the computer
with the matching plug for the motor cable (65) coming out of the main
frame (43).
2. Place the handlebar support (68) in the locator provided for it in the main
frame (43). Ensure that the cable connections made are not squashed.
When putting the steering tube in place, push the former slowly down
into the locator in the main frame. Screw the handlebar support (68)
onto the base frame (43) with the screws (64), spring washers (6) and
washers (45).
Step 3:
Attach the handlebar (73) at handlebar support (68).
1. Guide the preassembled handlebar unit (73) through the upper part of
the handlebar post (68), put the pulse cables (74) through the holes to
the top and close the bracket of handlebar holder.
2. Attach the handlebar cover (4) at the handlebar holder of handlebar
support (68) and screw the handlebar (73) in desired position at the
handlebar post (68) and tighten firmly with spacer (7), spring washer (6),
washer (5) and handlebar screw (8).
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit BT2 - 1205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit BT2 - 1205 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info