602837

Christopeit BLUE T2 Manual

18
Zoom out
Zoom in
Previous page
1/60
Next page
18
Installation instructions
Remove all the separate parts from the packaging, lay them on the floor
and check roughly that all are there on the base of the assembly steps.
Please note that a number of parts have been connected directly to
the main frame and preassembled. In addition, there are several other
individual parts that have been attached to separate units. This will make
it easier and quicker for you to assemble the equipment.
Assembly time: 45 -60 min.
Step 1:
Installation of front and rear foot (2+3) at the main frame (1).
1. Place the bolts (6) and each two washers (7), spring washers (8) and nuts
(9) ready for use beside the front and rear part of the main frame (1).
2. Place the front and rear foot (2+3) into the bracket of the main frame (1)
and align so that the hole patterns of the bracket and the foots are in
conformance.
(Note: The front foot caps with transport roller units (4) installed in the
front foot bar (2) must point forwards (as viewed when training, standing
on the machine).
3. Push one screw (6) each through the bores.
4. Install one washer (7) and one spring washer (8) each on the ends
of the screws (6) and fasten with one nut (9) each. (You can use
adjustable screw (10) to level the bike.)
Step 2:
Connecting the computer cables (17+18) and installation of handlebar
post (19).
1. Place the lower end of the handlebar post (19) against the main frame
(1). Connect the two ends of the computer cable (17) and (18) projecting
from (1) and (19).
2. When the electrical cable connections have been made, push the hand-
lebar post (19) into the main frame (1). (Note. When pushing the tubes
together, ensure that the electrical cable connection is not trapped.
The short tube welded crosswise to the upper end of the tubular sup-
port (19) must point forwards (as viewed when training standing on the
machine).
3. Push one spring washer (14) and one washer (15) or curved washer (16)
on each of the bolts (13). Push the bolts (13) through the bores in the
main frame (1), screw into the threaded holes of the handlebar post (19)
and tighten firmly.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit BLUE T2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit BLUE T2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info