543909
17
Zoom out
Zoom in
Previous page
1/48
Next page
17
Step 6:
Installation of the seat padding (22) on the longitudinal bar (3) with the
hexagonal bolt M6x35 (47) and the washers 6//12mm (54).
1. Place the named parts beside the machine.
2. Put one washer (54) on each screw (47).
3. Put the padding (22) on the holders of the longitudinal bar (3). Align
the threaded holes in the padding and the holes in the holders to each
other.
4. Push the screws (47) through the holes in the holders and screw into
the threaded holes in the padding (22) and tighten fi rmly.
English
Step 7:
Installation of the backrest padding (23) and the padding holders (15)
on the longitudinal bar (3) with the screws M6x35 (47), the washers
6//12mm (54).
1. Place the named parts beside the machine.
2. Push the padding holders (15) onto the shaft of the longitudinal frame
(3).
3. Put one washer (54) on each screw (47).
4. Put the padding (23) on the padding holders (15) of the longitudinal bar
(3).
5. Align the threaded holes in the padding and the holes in the holders to
each other.
6. Push the screws (47) through the holes in the holders and screw into
the threaded holes in the padding (23) and tighten fi rmly.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit BASIC CONCEPT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit BASIC CONCEPT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info