644057

Christopeit AX1 - 1104 Manual

16
Zoom out
Zoom in
Previous page
1/47
Next page
16
Step 3:
Attach the front post (6) at main frame (44).
1. Push the support cover (17) onto handlebar support (6).
2. Hold the handlebar support (6) with the computer cable (14) against the
main frame holder and connect the plug for the computer cable (14)
coming out of the bottom of the handlebar support (6) of the computer
with the matching plug for the motor cable (16) coming out of the main
frame (44).
3. Connect the middle section tension cable (48) to the bracket of lower
section cable tension (15) (See figure [1]-[3]). Before this step of the
installation, it is advisable to adjust the resistance setting to the highest
stage, at which the cable extends furthest from the sheath. Put the
lowest part of cable (48) into the small hook (figure 1). Pull it (figure 2)
until the small hook get in higher position and then insert the cable (48)
onto the bracket (15) (figure 3).
4. Place the handlebar support (6) in the locator provided for it in the main
frame (44). Ensure that the cable connections made in step 3 are not
squashed. When putting the steering tube in place, push the former
slowly down into the locator in the main frame. Screw the handlebar
support (6) onto the base frame (44) with the screws (8), spring
washers (7) and washers (7).
5. Push the plastic cover (17) into the right position to cover up the
connection screws.
Step 4:
Attach the saddle (57) and saddle support (47).
1. Push the saddle support tube (47) into the matching locator in the main
frame (44), set it at the desired position and lock it by inserting the bolt
with the quick release (46) in place and doing it up tight.
(The setting of the saddle support can be adjusted easily as desired
later through turning and pulling the quick release (46).)
Furthermore, you must ensure when setting this desired position that
the seat pillar is not pulled out of the main frame further than the highest
setting position, which is marked.
2. Place the saddle slide (56) into the holder of saddle post (47), set it at
the desired position and screw it onto the saddle support (47) by screw
(55) washer (53) and star grip nut (52).
3. Push the saddle (57) with saddle bracket into the saddle slide (56)
and tight it up in desired position.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit AX1 - 1104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit AX1 - 1104 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info