Manual Christopeit AX1 - 1104 (page 15 of 47) (English, German, Dutch, French)

644057

Zoom out

Zoom in

1/47

English

Assembly Instructions

Remove all the separate parts from the packaging, lay them on the

ﬂoor and check that all are there on the basis of the assembly steps in

these instructions for assembly and use. Please note that a number

of parts have been connected directly to the main frame and preas-

sembled.In addition, there are several other individual parts that have

been attached to separate units. This will make it easier and quicker

for you to assemble the equipment.

Step 1:

Attach the stabilizer (10+21) at main frame (44).

1. Attach the front foot (10) with the preassembled transport rollers (6) to

the main frame. Do this with the two screws (22), washers (7), spring

washers (19) and cap nuts (18).

2. Attach the rear foot (21) with eccentric caps (20) to the main frame.

Do this with the two screws (22), washers (7), spring washers (19) and

cap nuts (18). After assembly has been completed, you can compensate

for minor irregularities in the ﬂoor by turning the eccentric cap (20).

The equipment should be set up that the equipment does not

move of its own accord during a training session.

Step 2:

Attach the pedal (11L+11R) at pedal crank (41).

1. Screw the right pedal (11R) into the locator in the right-hand side

(as seen in operation) for the pedal crank (41) (warning! the screw

direction is clockwise).

2. Screw the left pedal (41) into the locator in the left-hand side

(as seen in operation) for the pedal crank (41)

(Warning! the screw direction is anti-clockwise).

3. Then mount the pedal straps left and right on the associated pedals

(11). (The pedals are signed with “L” for Left and “R” for Right.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit AX1 - 1104 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit AX1 - 1104 Manual

Product: