Manual Christopeit AP1 - 1100 (page 16 of 48) (English, German, Dutch, French)

644055

Zoom out

Zoom in

1/48

Step 3:

Attach the handlebar (2) at handlebar support (13).

1. Guide the preassembled handlebar unit (2) through the upper part of

the handlebar post (13) and close the bracket of handlebar holder.

2. Attach the handlebar cover (10) at the handlebar holder of handlebar

support (13).

3. Screw the handlebar (2) in desired position at the handlebar post (13)

with spacer (9) and handlebar screw (8).

Step 4:

Attach the computer (1) at handlebar support (13).

1. Take the computer (1) that has been supplied out of the packaging and

insert the batteries (Type “AA”-1.5 V pencells) by watching for the right

polarity on the back of the computer (1). (Batteries for the computer are

not included in this item. Please buy them at your located market.)

2. Push the plug of the connecting cable (7) projecting from the handlebar

support (13) into the associated socket of the computer (1).

3. Place the computer (1) on top of the handlebar support (13) and tight

ﬁrmly by using screw (3).

4. Push the plug of the pulse cable (6) projecting from the handlebar (2)

into the associated socket of the computer (1).

Step 5:

Installation of the saddle (20) on the saddle support (43) and of the

saddle support (43) on the main frame (26).

1. Place the saddle with the seat surface downwards.

2. Place the retaining plate of the saddle support (43) on the upwards

pointing bottom of the saddle (20). The threaded pieces on the bottom of

the saddle must project through the corresponding holes in the retaining

plate of the saddle support.

3. Place washers (42) and spring washers (21) on the threaded pieces,

screw on nuts (41) and tighten ﬁrmly.

4. Insert the saddle support (43) into the provided holder of the main frame

(26) and secure at the desired position by screwing in the rapid action

lock (23).

(Note: To screw in the rapid-action lock (23), the threaded hole in the

main frame (26) and one of the holes in the saddle support (43) must be

aligned. Furthermore, ensure that the saddle support (43) is not pulled

out of the main frame beyond the marked maximum adjustment position.

The setting of the saddle support can be adjusted as desired later.) For

this, the rapid-action lock (23) must be loosened by only a few revolutions

(do not unscrew completely), the top cap of the lock must be pulled

away and the saddle adjusted. To set the new position, release the top

cap and move the saddle support upwards and downwards until the

rapid-action lock engages. Then secure the new setting by tightening

the rapid-action lock.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit AP1 - 1100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit AP1 - 1100 Manual

Product: