Manual Christopeit AL2 (page 19 of 60) (English, German, Dutch, French)

566606

Zoom out

Zoom in

1/60

Step 3:

Attach the front post (12) at main frame (1).

1. Slide the handlebar support cover (11) onto the handlebar support (12).

2. Hold the handlebar support (12) with the computer cable (3) against the

main frame holder. Connect the plug for the computer cable (3) coming

out of the bottom of the handlebar support (12) of the computer with the

matching plug for the motor cable (16) coming out of the main frame

(1).

(Note: The computer cable harness (3) projecting from the support (3)

must not slide into the tube, as it is required for later steps of installation.)

3. Place the handlebar support (12) in the locator provided for it in the

main frame (1). Ensure that the cable connections made in step 3 are

not squashed. When putting the steering tube in place, push the former

slowly down into the locator in the main frame. Screw the handlebar

support (12) onto the base frame (1) with the screws (14), spring washers

(15) and washers (13).

4. Push the handlebar support cover (11) into right position to cover up

the screw connection point.

Step 4:

Attach the saddle (34) and saddle slide (33) at saddle support (29)

and the saddle support (29) at main frame (1).

1. Push the saddle (34) with saddle bracket into the saddle slide (33) and

tight it up in desired position.

2. Place the saddle slide (33) into the holder of saddle support (29), set it

at the desired horizontally position and screw it onto the saddle support

(29) by ﬁxing piece (6) washer (32) and star grip nut (31).

3. Push the saddle support tube (29) into the matching locator in the main

frame (1), set it at the desired position and lock it by inserting the bolt

with the quick release (30) in place and doing it up tight.

(The setting of the saddle support can be adjusted easily as desired later

through turning and pulling the quick release (30).) Furthermore, you must

ensure when setting this desired position that the seat pillar is not pulled

out of the main frame further than the highest setting position, which

is marked. Attention: Ensure before every exercising that the saddle is

tighten ﬁrmly.

English

Received my Christopeit AL2 Ergometer yesterday. Easy to assemble, but, the resistance while pedaling is very high. Obviously, I have tried with various programs to adjust the level but after a few seconds of relative easy pedaling the resistance shoots up. Anyone have any advice?
Regards, Ron Submitted on 17-2-2021 at 10:12
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit AL2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit AL2 Manual

Product: