Manual Christopeit AL2 (page 18 of 60) (English, German, Dutch, French)

566606

Zoom out

Zoom in

1/60

Assembly Instructions

Remove all the separate parts from the packaging, lay them on the ﬂoor

and check roughly that all are there on the base of the assembly steps.

Please note that a number of parts have been connected directly to

the main frame and preassembled. In addition, there are several other

individual parts that have been attached to separate units. This will make

it easier and quicker for you to assemble the equipment.

Step 1:

Attach the stabilizer (20+27) at main frame (1).

1. Put the end caps with transportation roller (18) at the ends of front foot

(20) in appropriate position and screw them tightly by using screw (71).

2. Attach the front foot (20) with the preassembled end caps with

transportation rollers (18) to the main frame (1). Do this with the two

screws (28), washers (13), spring washers (15) and cap nuts (19).

3. Put the end caps with height adjustment (26) at the ends of rear foot

(27) and screw them tightly by using screw (71).

4. Attach the rear foot (27) to the main frame (1). Do this with the two screws

(28), washers (13), spring washers (15) and cap nuts (19). After assembly

has been completed, you can compensate for minor irregularities in the

ﬂoor by turning the wheel at cap (26). The equipment should be set up

that the equipment does not move of its own accord during a training

session. If you like to change the position of the home bike, put one foot

in front of the front foot (20) and pull at handlebar in front direction until

the home bike can move easy on the transportation rollers to another

place.

Step 2:

Attach the pedals (22L+22R) at pedal crank (21L+21R).

1. Screw the right pedal (22R) into the locator in the right-hand side (as

seen in operation) for the pedal crank (21R) (warning! the screw direction

is clockwise).

2. Screw the left pedal (22L) into the locator in the left-hand side (as seen

in operation) for the pedal crank (21L)

(Warning! the screw direction is anti-clockwise).

3. Then mount the pedal straps left and right on the associated pedals

(22). (The pedals are signed with „L“ for Left and „R“ for Right.)

Received my Christopeit AL2 Ergometer yesterday. Easy to assemble, but, the resistance while pedaling is very high. Obviously, I have tried with various programs to adjust the level but after a few seconds of relative easy pedaling the resistance shoots up. Anyone have any advice?
Regards, Ron Submitted on 17-2-2021 at 10:12
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit AL2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit AL2 Manual

Product: