585788

Christopeit AB 1 Manual

16
Zoom out
Zoom in
Previous page
1/44
Next page
16
Step 3:
Installation of saddle (24) at saddle support (30) by using saddle slide
(25).
1. Push the saddle (24) with saddle bracket into the movable saddle slide
(25) and tight it up in desired position.
2. Place the movable seat post (25) into the holder of saddle post (30), set
it at the desired horizontally position and tighten it by washer (28) and
movable seat knob (29).
Step 4:
Installation of the saddle support (30) on the main frame (23) with the
rapid-action lock (32).
1. Insert the saddle support (30) into the provided holder of the main frame
(23) and secure at the desired position by screwing in the rapid-action
lock (32).
(Note: To screw in the rapid-action lock (32), the threaded hole in the
main frame (23) and one of the holes in the saddle support (30) must be
aligned. Furthermore, ensure that the saddle support (30) is not pulled
out of the main frame beyond the marked maximum Position. The setting
of the saddle post can be adjusted as desired later. For this, the rapid
action catch (32) must be loosened by only a few revolutions, the cap
of the lock must be pulled away and the saddle adjusted. Then secure
the new setting by tightening the rapid action catch.
Step 5:
Installation of the handlebar (14) and computer (1) on the handlebar
support (11).
1. Place the handlebar (14) against the handlebar support (11) and adjust
so that the hole patterns in the handlebar and the handlebar support are
aligned. Put one spring washer (76) on each screw (9). Push the screws
(9) through the holes in the support, screw into the threaded holes of
the support (11) and tighten fi rmly.
2. Cover the handle bar connection with handlebar cover (5).
3. Take the computer (1) that has been supplied out of the packaging and
insert the batteries (Type “AAA”-1.5 V pencells) by watching for the right
polarity on the back of the computer (1). (Batteries for the computer
are not included in this item. Please buy them at your located market.)
Push the plug of the connecting cable (2) projecting from the handlebar
support (11) into the associated socket of the computer (1).
4. Attach the monitor (1) to top monitor bracket of front post (11) with
screws (84) and washer (49).
5. Push the plug of the pulse cable (16) projecting from the handlebar (14
into the associated socket of the computer (1).
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit AB 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit AB 1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info