767905

Chicco Seat4Fix Air Manual

31
Zoom out
Zoom in
Previous page
1/238
Next page
31
30
2.2 HOW TO FIT THE CHILD CAR SEAT
(with ISOFIX SYSTEM) FRONT-FACING:
Gr. 1 (9-18 kg)
The Group 1 child car seat can be t front-fac-
ing (9-18 kg), ALWAYS using the Isox connec-
tors and Top Tether.
• Use the lever (Q) to rotate the seat 180°, ver-
ifying that it has locked in the front-facing
position (Fig. 21).
• Position the car seat on the seat of the vehicle
in the front-facing direction.
• Pull out the rigid connectors (C) completely,
pulling the tape outwards (V) (Fig. 22).
• Remove the Top Tether (F) from the door (W)
(Fig. 23).
• To make it easier to fasten the Isox connec-
tors, it is possible to use the special guides
provided, attaching them to the Isox hooks
of the car (Fig. 24)
• Fasten the connectors to the hooks present
between the backrest and the seat (Fig. 25).
Once fastening occurs, you will hear a typical
"click" and the indicator will change from red
to green.
• Firmly push the Car Seat toward the backrest of
the vehicle seat to ensure the best t (Fig. 26).
• Extend the Top Tether strap by pressing the
adjustment button (Y).
WARNING! Pass the Top Tether between the
top of the car seat backrest and the headrest.
Never pass the Top Tether above the car head-
rest.
WARNING! Refer to your car’s user manual to
identify where the Top Tether of the child car
seat is attached to the car. This fastening point
is denoted with a specic label and can be
found in the positions indicated by the gures
27A – 27B – 27C – 27D.
WARNING! Check that the Top Tether fastener
used is the one that has been specially desig-
nated. Do not confuse it with a ring used for
hanging bags (Fig. 28).
• Once you have identied the fastening point,
connect the Top Tether hook (X) to it.
• Adjust the length of the Top Tether belt by
forcefully pulling the belt until it is tight. The
indicator on the belt goes green (Z) when the
tether is suitably tight (Fig. 29). Roll up any ex-
cess belt and tie up using the velcro.
The booster cushion can be used without the
pad and without the headrest from 6 kg to 15 kg.
Refer to paragraph 3.1 BOOSTER CUSHION
To disassemble the child car seat, unhook the
Top Tether and the Isox connectors by press-
ing the release buttons (D) (Fig. 30). To put
them back in completely push them inwards.
Once installation is complete place the baby in
the seat as follows:
• Press the belt adjustment button (S) and hold
and pull both the Child Car Seat belts toward
yourself until the maximum length is reached
(Fig. 31).
• Unbuckle the Car Seat belts by pressing the
button on the buckle (Fig. 32).
• Place the baby in the car seat with care, join
the two buckle tongues and fasten them in
the buckle again (Fig. 33).
• To adjust belt tightness, pull the adjustment
strap (R) upwards with caution until the belt
is suitably tight (Fig. 34).
2.3 CHANGING THE CONFIGURATION OF
THE CAR SEAT FROM GR 0+/1 (0-18 KG) TO
GR 2/3 (15-36 KG)
It is recommended to perform this operation
outside the vehicle to have sucient room for
manoeuvre.
• Loosen the 5-point seat belts as much as pos-
sible using button S.
• Adjust the headrest to its maximum height
using the headrest and belts adjustment ring
(K).
• Turn the child car seat so you are looking at
the back of the seat.
• Open the Top Tether door (W) and remove
the two straps from the metal connector (Fig.
35).
• Position the metal connector in its specic
pocket (Fig. 36).
• Remove the shoulder straps, separating them
by pressing on the connecting ring (Fig. 37).
• Remove the straps, take o the shoulder
straps and put them inside the pocket (Fig.
38).
• Open the buckle by pressing the red button
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chicco Seat4Fix Air at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chicco Seat4Fix Air in the language / languages: All languages as an attachment in your email.

The manual is 7,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info