Manual Chicco Seat4Fix Air (page 30 of 238) (All languages)

767905

Zoom out

Zoom in

1/238

equipped with rear vehicle seat belt with in-

tegrated air bags (inatable seat belts), follow

the car manufacturer's instruction manual.

2. INSTALLATION

WARNING! The text and gures of these

instructions are for the installation of the

child car seat on the back right seat.To t

the child car seat in other positions, carry

out these operations in the same order.

2.1 HOW TO FIT THE CHILD CAR SEAT

(with ISOFIX SYSTEM) REAR-FACING:

GR. 0+ (0-13 KG) and GR1 (9-18 KG)

For the Group 0+ conguration, the Car Seat

must ALWAYS be rear-facing, with the airbag

Deactivated.

Installation must ALWAYS be carried out using

the Isox connectors and Top Tether

• Use the recline lever (P), to line up the red dot

with position R (Fig. 5)

• Use the lever (Q) to rotate the seat 180°, veri-

fying that it has locked in the rear-facing po-

sition (Fig. 6).

• Position the Car Seat on the seat of the vehi-

cle in the rear-facing direction.

• Pull out the rigid connectors (C) completely,

pulling the tape outwards (V) (Fig. 7).

• To make it easier to fasten the Isox connec-

tors, it is possible to use the special guides

provided, attaching them to the Isox hooks

of the car (Fig. 8)

• Fasten the connectors to the hooks present

between the backrest and the seat (Fig. 9).

Once fastening occurs, you will hear a typical

"click" and the indicator will change from red

to green.

• Firmly push the Car Seat toward the backrest

of the vehicle seat to ensure the best t (Fig.

10).

• Remove the Top Tether (F) from the door (W)

(Fig. 11).

• Extend the Top Tether strap by pressing the

adjustment button (Y).

• Pass the Top Tether through the blue belt

guide (Fig. 12).

WARNING! Pass the Top Tether between the

top of the car seat backrest and the headrest.

Never pass the Top Tether above the car head-

rest.

WARNING! Refer to your car’s user manual to

identify where the Top Tether of the child car

seat is attached to the car. This fastening point

is denoted with a specic label (Fig. 13) and

can be found in the positions indicated by the

gures 13A – 13B – 13C – 13D.

WARNING! Check that the Top Tether fastener

used is the one that has been specially desig-

nated. Do not confuse it with a ring used for

hanging bags (Fig. 14).

• Once you have identied the fastening point,

connect the Top Tether hook (X) to it.

Adjust the length of the Top Tether belt by

forcefully pulling the belt until it is tight. The

indicator on the belt goes green (Z) when the

tether is suitably tight (Fig. 15). Roll up any ex-

cess belt and tie up using the velcro.

The booster cushion including the pad and

headrest is to be used from birth up to 6 kg.

Refer to paragraph 3.1 BOOSTER CUSHION

To disassemble the child car seat, unhook the

Top Tether and the Isox connectors by press-

ing the release buttons (D) (Fig. 16). To put

them back in completely push them inwards.

Once installation is complete place the baby in

the seat as follows:

• Rotate the seat of the car child seat (90°) us-

ing the lever (Q) until it is positioned facing

you, to make it easier to place the child.

• Press the belt adjustment button (S) and hold

and pull both the Child Car Seat belts toward

yourself until the maximum length is reached

(Fig. 17).

• Unbuckle the Car Seat belts by pressing the

button on the buckle (Fig. 18).

• Place the baby in the car seat with care, join

the two buckle tongues and fasten them in

the buckle again (Fig. 19).

• To adjust belt tightness, pull the adjustment

strap (R) upwards with caution until the belt

is suitably tight (Fig. 20).

• Turn the seat rear-facing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Chicco Seat4Fix Air in the language / languages: All languages as an attachment in your email.

The manual is 7,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Chicco Seat4Fix Air Manual

Product: