767849

Chicco Liteway 3 Manual

13
Zoom out
Zoom in
Previous page
1/76
Next page
12
13
WARNING: Children must wear all the time the safety har-
ness. To ensure your child’s safety, it is necessary to always
use the safety harness.
HOW TO ADJUST THE BACKREST
The backrest can be adjusted to 5 positions.
5. Fit the two fabric panels to the rear tubes by fastening
the two press studs, as shown in Fig. 5.
6. To adjust the inclination of the backrest, press the button
located on the backrest. Release the button to lock the
backrest in the nearest position (Fig. 6).
7. To raise the backrest to the desired position, simply push
it upwards (Fig. 7).
WARNING: The child’s weight can make these operations
more dicult.
HOW TO ADJUST THE LEGREST
The stroller’s legrest can be adjusted in 2 positions for your
child’s improved comfort.
8. To adjust the position of the legrest, turn the two lateral
levers up until you reach the horizontal locking position
(g. 8).
9. To return to the starting position, press the lateral buttons
(g. 9).
WARNING: The legrest does not have the function to re-
tain the child.
REAR BRAKES
The rear wheels have linked brakes, which can be applied
simultaneously to the two rear wheels by using just one
pedal.
10. To apply the brakes, push one of the two levers located
at the centre of the rear wheel units in a downward di-
rection, as shown in g. 10.
11. To unlock the braking system, push one of the two le-
vers located at the centre of the rear wheel units in an
upward direction, as shown in g. 11.
WARNING: Always apply the brakes whenever the stroller
is stopped. Never leave the stroller on a sloped surface, with
a child inside, even with the parking brakes engaged.
WARNING: After operating the brake lever, ensure that
the brakes are correctly engaged in both of the rear wheel
units.
FRONT SWIVEL WHEELS
The stroller has front swivel/xed wheels. It is recommend-
ed to use the wheels in the xed mode on particularly
changeable surfaces. The use of the wheels in the swivel
mode is recommended in order to increase the control of
the stroller on a normal road surface
12. To use the front wheels in the swivel mode, push the front
lever in an upward direction with your foot, as shown in
g. 12. To use the front wheels in the xed mode, lower
the lever with the foot. The wheel will lock in the straight
position, regardless of its previous position.
WARNING: Both wheels must always be locked or un-
locked at the same time.
SUMMER/WINTER HOOD
13. To t the hood, fasten the plastic clip in the appropriate
positions, as shown in g. 13A. To complete tting the
hood on the seat, fasten the rear part of the hood on the
back of the stroller backrest using the relevant buttons
(g 13B).
WARNING: The hood must be xed on both sides of the
stroller. Ensure that the hood is correctly secured into position.
14. Open the hood as shown in g. 14A. Close the hood
pulling the front part towardS you as shown in g. 14B.
15. The hood can become a summer sun-canopy. The rear
panel may be removed by unfastening the zip and but-
tons on the rear side of the backrest (g. 15).
16. The hood can be opened in three dierent congura-
tions. The starting conguration provides standard pro-
tection (Fig. 16A). For extra protection, pull out the ap
present on the front end of the hood (Fig. 16B). Finally,
in order achieve complete protection, open the zipper
on the hood and pull out the rest of the textile part
(Fig.16C).
FOLDING THE STROLLER
WARNING: When opening the stroller, make sure that your
child or other children are at a safety distance. Make sure
that during these operations the moving parts of the stroll-
er will not come into contact with your child Before closing
the stroller, ensure that the storage basket is empty.
17. To close the stroller, pull the rear locking mechanism
in an upward direction (g. 17A), and unlock the pedal,
located on the right side of the stroller, with your foot
(see g. 17B).
18. To close the stroller completely, push the handles for-
ward (g. 18).
19. When the stroller is closed, the locking device located
on the side of the stroller will automatically lock it in the
close position (see g. 19), therefore preventing any ac-
cidental opening of the stroller.
HOW TO REMOVE THE FABRIC COVER
The fabric cover of the stroller can be removed.
20. To remove the fabric cover, raise the legrest (g. 20A).
Then unfasten the buckle (g. 20B), the press studs on
the seat (g. 20C) and the velcro straps around the low-
er part of the backrest bar (g. 20D); remove the fabric
cover, taking care to slide the safety harness through the
appropriate hole.
21. Unfasten the press studs located on the rear tubes of
the stroller, as shown in g. 21A. Unfasten the press stud
A and remove the two hooks B and C, located under the
fabric panel on the side of the stroller (g. 21B). Lastly,
remove the fabric cover from the backrest, pulling it in
an upward direction. Follow the steps above in reverse
order to t the lining again.
WARNING: Check regularly that the belt under the seat is
tensioned (g. 20B).
If the strap is loose, tension it.
ACCESSORIES
WARNING: The accessories described below may not be
available for some versions of this product. Please read
carefully the instructions on the accessories available for
the model purchased.
STORAGE BASKET
The stroller may come with a storage basket.
22. Fasten the basket by passing the front slots through the
supports A. Fasten the velcro straps around the tubes B;
Then pass the rear straps around the tubes C and fasten
30° C
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Periodically wipe clean plastic parts with a soft damp cloth.
Always dry the metal parts to prevent the formation of rust
if the folding cot has come into contact with water.
MAINTENANCE
Lubricate the moving parts only if necessary, with a light
application of a silicone based lubricant. Regularly check
the condition of the wheels and, keep them clean of dust
and sand. To avoid friction that may prevent correct oper-
ation of the stroller, make sure that all the movable plastic
parts along the metal frame are clean of dust, dirt or sand.
Keep the stroller in a dry place.
GENERAL INSTRUCTIONS
HOW TO ASSEMBLE THE FRONT WHEELS
1. Assemble the front wheel, inserting it into the appropri-
ate joint until you hear a click indicating that it is locked
correctly into position (g. 1). Repeat this operation with
the other wheel.
WARNING: Before use, ensure that the wheels are locked
correctly.
OPENING THE STROLLER
WARNING: When opening the stroller, make sure that your
child or other children are at a safety distance.
Make sure that during these operations the moving parts
of the stroller will not come into contact with your child
2. Release the closing device and push the front part of the
stroller forward (g. 2).
3. Push the rear primary locking mechanism downward with your
foot (g. 3).
WARNING: Before use, ensure that the stroller is locked in
the open position, by checking that the rear locking mech-
anism is eectively locked.
HOW TO USE THE SAFETY HARNESS
This stroller has a ve-point safety harness featuring two
shoulder straps, two adjustment holes, a waist strap and a
crotch strap with buckle.
After removal of the safety harness (e.g. for washing), en-
sure that the harness is reassembled correctly using the
anchorage points. The harness must be re adjusted.
WARNING: When carrying children up to 6 months of age,
the shoulder straps must be passed through the 2 adjuster
slots.
4. If necessary, adjust the height of the shoulder straps, in-
serting them into the adjustment hole, as shown in g. 4.
After sitting your child in the stroller, fasten the safety har-
ness, rst inserting the two prongs into the hole located
on the shoulder straps (g. 4A and 4B) and then into the
buckle of the crotch strap (g. 4C). Adjust the length of
the straps, ensuring that they adhere to the child’s shoul-
ders and body correctly. To unfasten the waist strap, press
and pull the side prongs.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chicco Liteway 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chicco Liteway 3 in the language / languages: All languages as an attachment in your email.

The manual is 9,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info