Manual Chicco Liteway 3 (page 12 of 76) (All languages)

767849

Zoom out

Zoom in

1/76

WARNING: Children must wear all the time the safety har-

ness. To ensure your child’s safety, it is necessary to always

use the safety harness.

HOW TO ADJUST THE BACKREST

The backrest can be adjusted to 5 positions.

5. Fit the two fabric panels to the rear tubes by fastening

the two press studs, as shown in Fig. 5.

6. To adjust the inclination of the backrest, press the button

located on the backrest. Release the button to lock the

backrest in the nearest position (Fig. 6).

7. To raise the backrest to the desired position, simply push

it upwards (Fig. 7).

WARNING: The child’s weight can make these operations

more dicult.

HOW TO ADJUST THE LEGREST

The stroller’s legrest can be adjusted in 2 positions for your

child’s improved comfort.

8. To adjust the position of the legrest, turn the two lateral

levers up until you reach the horizontal locking position

(g. 8).

9. To return to the starting position, press the lateral buttons

(g. 9).

WARNING: The legrest does not have the function to re-

tain the child.

REAR BRAKES

The rear wheels have linked brakes, which can be applied

simultaneously to the two rear wheels by using just one

pedal.

10. To apply the brakes, push one of the two levers located

at the centre of the rear wheel units in a downward di-

rection, as shown in g. 10.

11. To unlock the braking system, push one of the two le-

vers located at the centre of the rear wheel units in an

upward direction, as shown in g. 11.

WARNING: Always apply the brakes whenever the stroller

is stopped. Never leave the stroller on a sloped surface, with

a child inside, even with the parking brakes engaged.

WARNING: After operating the brake lever, ensure that

the brakes are correctly engaged in both of the rear wheel

units.

FRONT SWIVEL WHEELS

The stroller has front swivel/xed wheels. It is recommend-

ed to use the wheels in the xed mode on particularly

changeable surfaces. The use of the wheels in the swivel

mode is recommended in order to increase the control of

the stroller on a normal road surface

12. To use the front wheels in the swivel mode, push the front

lever in an upward direction with your foot, as shown in

g. 12. To use the front wheels in the xed mode, lower

the lever with the foot. The wheel will lock in the straight

position, regardless of its previous position.

WARNING: Both wheels must always be locked or un-

locked at the same time.

SUMMER/WINTER HOOD

13. To t the hood, fasten the plastic clip in the appropriate

positions, as shown in g. 13A. To complete tting the

hood on the seat, fasten the rear part of the hood on the

back of the stroller backrest using the relevant buttons

safest way.

• After removal of the safety harness

(e.g. for washing), ensure that the

harness is reassembled correctly

using the anchorage points. The

harness must be re adjusted. To

make sure the harness straps are

tted correctly (on the rear surface

of the seat), place the child inside,

fasten the straps and then pull the

ends of the straps rmly.

• Always apply the brakes whenever

the stroller is stopped.

• To avoid all strangulation risks, nev-

er give children objects with cords or

strings attached, or leave them with in

proximity of such objects.

• Always pay attention when going

up and down steps or pavements.

• If the stroller has been exposed di-

rectly to sunlight for a long time,

you must let it cool down before

placing your child inside of it. Pro-

longed exposure to direct sunlight

may cause the colour of the mate-

rials and fabric to fade.

• Do not use this product if some

parts are broken, torn or missing.

• Prevent the stroller from contact

with salty water. It might cause the

formation of rust.

• Do not use the stroller on the

beach.

TIPS FOR CLEANING AND MAINTENANCE

This product requires periodical maintenance. Cleaning

and maintenance operations must be carried out by an

adult.

CLEANING

The cover can be removed (please refer to the section “How

to Remove the Fabric Cover”). Please refer to the care labels

for instructions on how to clean the fabric parts. Below are

the cleaning symbols and their meanings:

Wash by hand in cold water

30° C

Do not bleach

Do not tumble dry

Do not iron

Do not dry clean

Periodically wipe clean plastic parts with a soft damp cloth.

Always dry the metal parts to prevent the formation of rust

if the folding cot has come into contact with water.

MAINTENANCE

Lubricate the moving parts only if necessary, with a light

application of a silicone based lubricant. Regularly check

the condition of the wheels and, keep them clean of dust

and sand. To avoid friction that may prevent correct oper-

ation of the stroller, make sure that all the movable plastic

parts along the metal frame are clean of dust, dirt or sand.

Keep the stroller in a dry place.

GENERAL INSTRUCTIONS

HOW TO ASSEMBLE THE FRONT WHEELS

1. Assemble the front wheel, inserting it into the appropri-

ate joint until you hear a click indicating that it is locked

correctly into position (g. 1). Repeat this operation with

the other wheel.

WARNING: Before use, ensure that the wheels are locked

correctly.

OPENING THE STROLLER

WARNING: When opening the stroller, make sure that your

child or other children are at a safety distance.

Make sure that during these operations the moving parts

of the stroller will not come into contact with your child

2. Release the closing device and push the front part of the

stroller forward (g. 2).

3. Push the rear primary locking mechanism downward with your

foot (g. 3).

WARNING: Before use, ensure that the stroller is locked in

the open position, by checking that the rear locking mech-

anism is eectively locked.

HOW TO USE THE SAFETY HARNESS

This stroller has a ve-point safety harness featuring two

shoulder straps, two adjustment holes, a waist strap and a

crotch strap with buckle.

After removal of the safety harness (e.g. for washing), en-

sure that the harness is reassembled correctly using the

anchorage points. The harness must be re adjusted.

WARNING: When carrying children up to 6 months of age,

the shoulder straps must be passed through the 2 adjuster

slots.

4. If necessary, adjust the height of the shoulder straps, in-

serting them into the adjustment hole, as shown in g. 4.

After sitting your child in the stroller, fasten the safety har-

ness, rst inserting the two prongs into the hole located

on the shoulder straps (g. 4A and 4B) and then into the

buckle of the crotch strap (g. 4C). Adjust the length of

the straps, ensuring that they adhere to the child’s shoul-

ders and body correctly. To unfasten the waist strap, press

and pull the side prongs.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Chicco Liteway 3 in the language / languages: All languages as an attachment in your email.

The manual is 9,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Chicco Liteway 3 Manual

Product: