Manual Chicco Fold and Go i-Size (page 19 of 164) (All languages)

767878

Zoom out

Zoom in

1/164

H. Safe Pad

I. Recline adjustment lever

J. Backrest blocking strip (for closing the child

seat)

Figure B

K. Backrest width adjustment wheel

L. Backrest height adjustment lever

M. Backrest release lever

N. Back pocket for instruction manual

O. Carry handle

Figure C

P. Isox connector eject button

Q. Isox connector release button

R. Isox connectors

S. Isox connector indicators

T. Side Safety System

1.4 RESTRICTIONS AND REQUIREMENTS

REGARDING THE USE OF THE PROD-

UCT AND VEHICLE SEAT

WARNING! Strictly comply with the following

restrictions and requirements for use concern-

ing the product and vehicle seat: If not fol-

lowed your child’s safety will be compromised.

• The height of the child must be between 100

and 150 cm.

• The vehicle’s seat must be equipped with

3-point vehicle seat belt, whether static or

with winder, approved according to UN/ECE

Regulation no. 16 or other equivalent stand-

ards (Fig. 1-2).

WARNING! When using in vehicles equipped

with rear seat belts with integrated airbags (in-

atable seat belts), follow the car manufactur-

er’s instruction manual.

• It may happen that the vehicle seat belt

buckle is too long and exceeds the expected

height above the bottom of the car seat (Fig.

3A-3B).In this case the seat must not be xed

on that seat but must be installed on another

seat on which there is no problem. For more

information, contact your car manufacturer.

• The Car seat can be installed on the front seat,

passenger side, or on any of the rear seats, and

always positioned in the driving sense. Never

use this child car seat on vehicle seats facing

the sides or opposite to the direction of the

drivers seat (Fig. 4).

WARNING! According to accident statistics,

a vehicle’s rear seat is generally safer than the

front seat: we therefore suggest installing the

car seat on the rear seat of the vehicle. In par-

ticular, the safer seat is the rear central one, if

featuring a 3-point belt: in this case, we suggest

positioning the Car seat on the rear central

seat. If the Car seat is positioned on the front

seat, for further safety, we suggest pushing the

seat as far back as possible, depending on the

presence of other passengers on the rear seat,

and adjust the backrest in upright position. If

the car features a belt height regulator, secure

the latter in the lowest position. Then, make

sure that the belt regulator is positioned far

back (or aligned) compared to the backrest of

the vehicle’s seat (Fig. 5A-5B). If the front seat

is equipped with front airbag, is not advisable

to install the Car seat on this seat. Always refer

to your vehicle’s instruction manual when in-

stalling the child car seat on any seat protected

by airbag.

2. INSTALLING THE CHILD CAR SEAT

2.1 INSTALLING THE CHILD CAR SEAT WITH

THE VEHICLE SEAT BELT AND ISOFIX

RIGID CONNECTORS

WARNING! The text and gures of these in-

structions are for the installation of the child

car seat on the right back seat. When tting the

child car seat in other position these operations

should in any case be carried out in the same

order.

WARNING! Before installing the child car seat

with Isox connectors, make sure the child car

seat is in vertical position, not reclined.

WARNING! •Check that the car seat headrest

does not interfere with the headrest of the

child car seat: it must not push it forward (Fig.

6). If this happens, remove the headrest from

the car seat. Remember to reposition the head-

rest on the vehicle seat if the child car seat is

removed and the seat is used by a passenger.

1. Remove the Isox connectors (R) by pressing

and holding button (P) down (Fig. 7).

2. Fasten the two rigid connectors (R) to the

corresponding ISOFIX hooks on the car seat

between the backrest and the seat (Fig. 8).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Chicco Fold and Go i-Size in the language / languages: All languages as an attachment in your email.

The manual is 1,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Chicco Fold and Go i-Size Manual

Product: