Manual Chicco Fold and Go i-Size (page 21 of 164) (All languages)

767878

Zoom out

Zoom in

1/164

seat backrest (Fig. 5A-5B).

WARNING! Never pass the car safety belt in

positions other than those indicated in this in-

struction booklet! (g. 16).

WARNING! Make sure that your child is cor-

rectly secured in the child car seat, so that he

does not slide forward.

WARNING! Check that the unused Isox rigid

connectors are not pulled out.

WARNING! When the child car seat is not in

use, it should always be left secured with the

3-point belt to the car seat or stowed in the

boot. In fact, an unsecured car seat may pose

a hazard to the passengers in case of accident

or sudden braking.

To remove the child from the child car seat,

simply unfasten the buckle of the car safety

belt, accompanying the belt during rolling.

3. REMOVING THE CHILD CAR SEAT

WARNING! Remove the child from the child

car seat before removing.

1. Release the car seat belt.

2. Remove the diagonal part of the belt from

the guide, accompanying it during rolling.

3. If the child car seat has also been fastened

with the Isox rigid connectors, it is neces-

sary to release them from the appropriate

hooks using the release button (Q).

WARNING! The release button (Q) may not be

accessible, so you need to press and hold the

Isox (P) connector eject button and simulta-

neously pull the child car seat towards you until

the Isox connectors are fully pulled out.

• Pull the two red buttons (Q) to release the

connectors from the corresponding Isox

connections of the car seat (Fig.18), so that

the indicator is totally red.

• Push the rigid connectors into the base of the

child car seat and completely retract them

into the base, holding down one of the but-

tons (P) (Fig. 19).

4. FOLDING AND TRANSPORT OF THE SEAT

For easy transport of the child car seat, it is pos-

sible to compact it by folding the backrest over

the seat. To carry out this step, it is necessary to

check that the backrest is in the lowest position

(see paragraph “7.1 ADJUSTING THE BACKREST

HEIGHT”).

At this point, use the backrest release lever (M)

to fold the backrest into the seat (Fig. 20).

WARNING! With the backrest not fully low-

ered, the backrest release lever (M) may not be

easily accessible.

To keep the child car seat compact, remove

the backrest blocking strip (J) from its seat and

fasten it to one of the two special slots on the

side of the backrest width adjustment wheel

(K) (Fig. 21).

To comfortably move the seat in this congura-

tion, you can use the carrying handle (O) locat-

ed on the back of the seat (Fig. 22 ).

5. INSTALLING AND REMOVING THE SIDE

SAFETY SYSTEM

The Side Safety System (T) is a device that is in-

stalled on the door side for utmost protection in

the case of a side impact.

To install it, insert the hook “1” in the hole on

the side ap (D) on the door side and press the

central part until the other end “2” is also fas-

tened to the structure (Fig. 23).

6. INSTALLING THE SAFE PAD

The Safe Pad (H) is a device that must ALWAYS

be installed on the diagonal vehicle seat belt

to ensure proper protection in the event of an

impact.

For correct installation, it is necessary to po-

sition the diagonal belt under the two Velcro

straps of the Safe Pad (Fig. 24) and close it on

itself making sure that the circular part is posi-

tioned between the chin and the chest of the

child (Fig. 25).

WARNING! The Safe Pad must ALWAYS be

used.

7. OTHER OPERATIONS

7.1 ADJUSTING THE BACKREST HEIGHT

It is possible to adjust the backrest height in

9 positions to the height of your child. Ensure

that the child’s head is secured and that the

car’s diagonal belt is correctly supported on

the child’s shoulder. When adjusting the height

of the backrest, check that the diagonal belt

guide (B) is positioned above the shoulder at a

maximum distance of 2 cm (Fig. 26).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Chicco Fold and Go i-Size in the language / languages: All languages as an attachment in your email.

The manual is 1,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Chicco Fold and Go i-Size Manual

Product: