Manual Charlton Jenrick Fireline Woodtec 5 (page 10 of 28) (English)

707656

Zoom out

Zoom in

1/28

9 Woodtec Freestanding Issue 01.1 05/17

Whilst 150mm diameter flue or liner is recommended wherever possible, a suitable 5” flexible

flue liner is permitted be used on these stoves providing that they only burn smokeless fuel or

seasoned wood logs with the air limiter fitted in in full accordance with the wood burning

instructions.

An existing fireplace opening can be bricked up or sealed with a register plate. A short length of

suitable quality rigid flue pipe of a minimum 125mm internal diameter may then be used to

connect the stove to the chimney. A maximum of 150mm horizontal flue pipe can be used. This

flue pipe should conform to Building Regulations. If the connecting pipe enters the vertical flue

way at any other angle except vertically, ensure that the pipe end is no closer (along the

direction of the pipe) than 76mm to the side or rear chimney walls. Ideally, the old fireplace

should be filled in so that there is a smooth streamlined entry into the flue way. It is essential

that all connections between the stove and chimney-flue are sealed and made airtight with

sealing rope, clamping rings and/or fire cement or heat resisting cement where required.

Both the chimney and flue pipe must be accessible for cleaning and if ANY parts of the chimney

cannot be reached through the stove (with baffle removed), a soot door must be fitted in a

suitable position to enable this to be done.

5.6. Material Clearance Dimensions

5.6.1. Safety Distances from Combustible Surfaces:

* To use the minimum clearances from a combustible back wall, the optional heatshield

(supplied with the stove) MUST be fitted and twin wall flue MUST be fitted from the top of

the stove. You must also continue to comply with Building Regulations combustible material

distances from flue pipes unless appropriate heat shielding is used or other information is

available from the flue pipe manufacturer.

In addition it is strongly recommended that any furniture or other combustible materials are

kept at least 900mm clear from the front of the stove.

NOTE: Combustible surfaces can be protected from radiant heat from the stove by adding non-

combustible heat shielding between the stove and the materials with an air gap behind it. By

doing so, safe distances may be substantially reduced in practice.

Model

Side (Full

wall)

Twin Wall

Flue

Side (Full

wall)

Single Wall

Flue

*Rear

Single Wall

Flue

(no shield)

*Rear

Single Wall

Flue

(with shield)

*Rear

Twin Wall

Flue

(no shield)

*Rear

Twin Wall

Flue

(with shield)

Woodtec

5kW

400mm

(From Top

Plate)

450mm

(From Top

Plate)

300mm

(From Top

Plate)

100mm

(From Heat

Shield)

150mm

(from top plate)

75mm (From

Heatshield)

Woodtec

5kW Wide

550mm

(From Top

Plate)

550mm

(From Top

Plate)

300mm

(From Top

Plate)

125mm

(From Heat

Shield)

175mm

(from top plate)

75mm (From

Heatshield)

Woodtec

5kW Xtra

Wide

500mm

(From Top

Plate)

500mm

(From Top

Plate)

250mm

(From Top

Plate)

150mm

(From Heat

Shield)

200mm

(from top plate)

100mm

(From

Heatshield)

where will i locate the SERIAL No of my WOODTEC 5 wood burner for Warranty MANY THANKS Submitted on 17-5-2022 at 18:18
Reply Report abuse
where will i find the SERIAL No on my WOODTEC 5 for the Warranty many thanks P. Loach Submitted on 17-5-2022 at 18:13
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Charlton Jenrick Fireline Woodtec 5 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Charlton Jenrick Fireline Woodtec 5 Manual

Product: