555413
9
Zoom out
Zoom in
Previous page
1/22
Next page
1
15
Position the Opener
NOTE: A 25mm (1") board (1) is
convenient for setting an ideal door-to-rail
distance (unless headroom is not
sufficient).
Raise the opener onto a stepladder. Open
garage door. Place a 25mm (1") board (1)
laid flat on the top section of door near the
centerline as shown. Rest the rail on the
board.
If the raised door hits the trolley, pull down
on the trolley release arm to disconnect the
inner and outer trolley sections. The trolley
can remain disconnected until connecting
door arm to trolley is completed
.
A
C
3
1
2
2
5
1
2
3
1
B
2
4
1
3
3
2
5
2
3
6
6
6
16
Hang the Opener
The opener must be securely fastened to a
structural support of the garage.
Three representative installations are shown. Yours
may be different. Hanging brackets (1) should be
angled (Figure A) to provide rigid support. On finished
ceilings, (Figure B) attach a sturdy metal bracket (not
supplied) (4) to a structural support before installing
the opener. For concrete ceiling mount, (Figure C), use
concrete anchors (5) provided.
On each side of opener measure the distance from the
opener to the structural support (or ceiling).
Cut both pieces of the hanging bracket to required
lengths. Flatten one end of each bracket and bend or
twist to fit the fastening angles. Do not bend at the
bracket holes. Drill 4.5mm (3/16") pilot holes in the
structural supports (or ceiling). Attach brackets to
supports with wood screws (2).
Lift opener and fasten to hanging brackets with screw,
lock washer and nut (3). Check to make sure rail is
centered over the door. REMOVE 25mm (1") board.
Operate door manually. If door hits the rail, raise
header bracket. Use rail grease and lubricate bottom
surface of rail (6).
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chamberlain ML750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chamberlain ML750 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Chamberlain ML750

Chamberlain ML750 User Manual - English, German, Dutch, French, Italian - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info