555430
38
Zoom out
Zoom in
Previous page
1/48
Next page
37
Operation
Motion Detecting Control Panel (continued)
LOCK
The LOCK feature isdesigned to prevent activation ofthe garage door opener from remote controls
while still allowing activation from the door control and keyless entry.Thisfeature isuseful for added
peace of mind when the home isempty (i.e.vacation).
l
Activate: Pressand hold the LOCK button for 2 seconds.The command LED will flash aslong
as the lockfeature is activated and your handheld remote control will not operate your door at
thistime.
l
Deactivate: Press and hold the LOCK button again for 2 seconds.The command LED will stop
flashing and normal operation will resume.
TIMER-TO-CLOSE
DO NOT enable TTC if operating a one-piece door. The TTC can be turned on or offand the time
interval can be adjusted to 1, 5,and 10 minute intervals. Once the TTC hasbeen set and the door is
open, the selected close interval will blink and begin to count down to close the door.
l
Activate: Pressand hold the ON button until one of the TTC LEDs light up.Then pressthe ON
button again to cycle through the time interval options (the corresponding TTC LED will light for
each time interval). The garage door opener light bulbs will blink asconfirmation.
l
Deactivate: Press and hold the OFF button until all TTC LEDs turn off and a beep is heard from
the motor unit.
l
Temporarily hold door open (suspend TTC): Press and release the HOLD OPEN button. Press
the HOLD OPEN button again to resume normal TTC operation.
PROGRAM
Any compatible remote controls, wireless keyless entry, or MyQ
®
accessories can be programmed to the
garage door opener by pressing the Learn button.
ON (TTC)
OFF (TTC)
Command LED
Motion Sensor
Switch
LIGHT
Button
HOLD OPEN
Button(TTC)
Motion
Sensor
Push Bar
1, 5, and
10 Minute
TTC LED
LEARN Button
LOCK Button
Using the Smart Control Panel
SYNCHRONIZE THE DOOR CONTROL
To synchronize the door control to the garage door opener, pressthe push bar until the garage door
opener activates (itmaytake up to 3 presses). Test the door control bypressing the push bar,each press
of the push bar will activate the garage door opener.
Push Bar
LIGHT Button
Motion Sensor
Navigation Buttons
Screen
SMART CONTROL PANEL FEATURES
PUSH BAR
Press the push bar to open or close the door.
LIGHTS
Light Button
Press the LIGHT button to turn the garage door opener lights on or off. When the lights are turned on
they will stay on until the LIGHT button ispressed again, or until the garage door opener is activated.
Once the garage door opener is activated the lights will turn offafter the specified period of time (the
factory setting is4-1/2 minutes).The LIGHTbutton will not control the lightswhen the door is in motion.
The duration ofthe light timing can be adjusted by accessing the menu using the navigation buttons.
Motion Sensor
The motion sensor will automatically turn on the garage door opener lightswhen motion is detected. The
lights will come on for the set period of time, then shutoff.The factory setting ison and setat 4-1/2
minutes.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chamberlain LW5000EV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chamberlain LW5000EV in the language / languages: English as an attachment in your email.

The manual is 5,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info