776545
10
Zoom out
Zoom in
Previous page
1/19
Next page
GPS Tracker 102-B
10005142
2
Sehr geehrter Kunde,
zunächst möchten wir Ihnen zum Erwerb Ihres Gerätes gratulieren.
Bitte lesen Sie die folgenden Anschluss- und Anwendungshinweise sorgfältig durch und befolgen Sie diese
um möglichen technischen Schäden vorzubeugen.
Inhaltsverzeichnis
1 Zusammenfassung………………………………………………………...…..3
2 Anwendung….………………………………………………………….………...3
3 Gerätebeschreibung…………………………………………………………3
3.1 Vorne………………………………………………………………………….3
3.2 Hinten…………………………………………………………………………3
3.3 Seite……………………………………………………………………..…...3
3.4 Unten……………………………….…………………………………………3
3.5 Innenansicht.…………………….…………………………………………3
4 Spezifikationen……………………………………………………………………Error!
Bookmark not defined.
5 Gebrauch…………………………………………………………………………….5
5.1 SIM Karte einlegen......………………………………………………….5
5.2 Batterie und Ladegerät………………………………………………….5
5.3 Start……………………………………………………………………………5
5.4 Initialisation………………………………………………………………...6
5.5 Passwort ändern…………………………………………………………..6
5.6 Authorisierung………………………………………………………………6
5.7 Echtzeit-Anfrage……………………………………………………........6
5.8 Ausgabe von Straßennamen / Adresse...............................7
5.9 Auto Track…………………………………………………………………..7
5.10 Stimmenüberwachnung………………………………………………..7
5.11 Moduswechsel zwischen “track” und “monitor…………….7
5.12 Speicher……………………………………………………………………..7
5.13 Datentransfer……………………………………………………………...8
5.14 Geo-Gitter…………………………………………………………………..8
5.15 Bewegungsalarm………………………………………………………...8
5.16 Geschwindigkeitsalarm……………………………………………...8
5.17 SOS Knopf………………………………………………………………....8
5.18 Batteriewarner................................................................8
5.19 Statusprüfung.................................................................9
5.20 IMEI Check………………………………………………………….....…....9
5.51 Zeit ändern……………………………………………………………...........9
5.22 GPRS einstellen……………………………………………………….......9
5.23 Moduswechsel zwischen “SMS” and “GPRS”………..………....9
5.24 Anleitung der Online- bzw. PC-Überwachungssoftware....9
6 .Vorsicht……………………………………………………………………………..10
7 Problembehebung……………………………………………………….……..10
3
1 Zusammenfassung
Arbeitsbereich im vorhandenen GSM/GPRS Netwerk und GPS Satelliten, dieses Produkt kann alls entfernten
Zielobjekte über SMS und Internet lokalisieren und überwachen.
2 Anwendung
Fahrzeugvermietung / Flottenmanagement usw
Starker Magnet & wasserabweisend, kann an einem versteckten Ort des KFZ angebracht werden.
Schutz von Kindern / Älteren / Behinderten / Haustieren usw
Verschafft dem Geschäftmann ein beruhigendes Gefühl
3 Gerätebeschreibung
3.1 Vorne
3.2 Hinten
innerer, starker Magnet
3.3 Seite
3.4 Unten
3.5 Innenansicht
Hier kann die Software
aktualisiert werden und
die Batterie geladen
werden
Drücken Sie im Notfall den SOS-Knopf für 3
Sek.
Indikator für Signale
GSM/GPRS integrierte
Antenne
Mikrophone
SIM-Karte hier einlegen
Ein-/Ausschalten
Batterein wie beschrieben
einlegen
4
4 Spezifikationen
Inhalt
Spezifikationen
Maße
64mm x 46mm x 17mm
Gewicht
50g
Netwerk
GSM/GPRS
Band
850/900/1800/1900Mhz
GPS Chip
SIRF3 Chip
GPS Sensibilität
-159dBm
GPS Genauigkeit
5m
Aktivierungsdauer
Kalter Status 45s
Warmer Status 35s
Heißer Status 1s
KFZ Lagegerät
1224V Eingang
5V Ausgang
Ladegrät für die
Steckdose
110220V Eingang
5V Ausgang
Batterie
Aufladbar 3.7V 800mAh Li-Ionen Batterie
Standby
80hours
Lagertemperatur
-40°C to +85°C
Arbeitstemperatur
-20°C to +55°C
Luftfeuchtigkeit
5%--95% kein Kondenz
5
5 Gebrauch
5.1 SIM Karte einlegen
Vergewissern Sie sich, dass keine Anrufe automatisch angenommen werden, die Anrufbenachrichtigung
eingeschalten und der Einschalt-PIN deaktiviert ist. Die SMS-Nachriten müssen im Textformat und nicht im
PDU-Format gesendet werden.
Arbeitsschritte:
1. Entfenen Sie die hintere Abdeckung und nehmen Sie die Batterie heraus.
2 Schieben Sie den Halten in die gezeigte Richtung und klappen ihn dann hoch..
3. Legen Sie die SIM Karte ein und fixieren diese mit dem Halter.
5.2 Batterie und Ladegerät
Laden Sie die Batterie vor dem ersten Gebrauch mindestens 8-12 Stunden. Bitte benutzen Sie nur vom
Hersteller empfohlene Batterien und Ladegeräte. Die vollständig geladene Batterie ermöglicht einen Betrieb
von ca. 80 Stunden. Nach dem ersten Gebrauch reicht eine Ladezeit von 3-5 Stunden und die Batterie
vollständig zu laden..
Achtung:
a: Li-Ionen-Batterie enthalten giftige Stoffe. Öffnen Sie diese nicht gewaltsam und halten Sie diese von
Feuer fern.
b: Bitte beachten Sie die Ladezeiten, damit die Batterie ohne Probleme funktioniert.
5.3 Start
Legen Sie die SIM Karte und Batterie ein.
Schalten Sie das Gerät das Gerät ein, indem Sie den Ein-/Ausschalter halten bis der Indikator an ist.
Setzen Sie vor dem ersten Gebrauch das gerät auf Werkseinstellungen zurück. (Siehe Punkt 5.4 der
Anleitung.)
In 10 bis 40 Sekunden ist das Gerät betriebsbereit. Es hat dann das GSM- und das GPS-Signal
empfangen. Der Indikator blinkt während des Signalempfangs alle 4 Sekunden, ansonsten leuchtet er
durchgängig.
Wenn das Gerät ohne Probleme das GPS-Signal gefunden hat, können Sie den weiteren Anweisungen
folgen.
6
5.4 Initialisation
Senden Sie eine SMS mit dem Text “begin+password” an das Gerät. Das Gerät wird automatisch mit “begin
ok” antworten. (Standard-Passwort: 123456)
Sie schicken z.B. eine SMS mit “begin123456“, wenn diese erfolgreich war antwortet das Gerät mit “begin
OK” anderenfalls mit “begin fail”. Dann sollten Sie den Text, das SMS-Format und das Passwort überprüfen.
Achtung: Die, in den folgenden Anweisungen aufgeführten, “+”-Zeichen lassen Sie bitte in Ihren SMS-
Nachrichten weg und für “Leerzeichen” geben Sie ein Leerzeichen ein.
5.5 Passwort ändern
Senden Sie folgende SMS password+”altes Passwort”+Leerzeichen+”neues Passwort” um das Passwort zu
ändern.
Hinweis:
5.5.1 Nehmen Sie ein Passwort an das Sie sich leicht erinnern können, da Sie bei einem vergessenen
Passwort das Gerät auf Werkseinstellungen zurücksetzen müssen (nur direkt am Gerät möglich).
5.5.2 Das Passwort muss aus 6 Zeichen bestehen.
5.6 Authorisierung
Sie können nur 5 Telefonnummern authorisieren.
5.6.1 Rufen Sie das Gerät 10mal an und die anrufende Nummer ist automatisch authorisiert.
5.6.2 Senden Sie eine SMS mit admin+”Passwort”+Leerzeichen+”Telefonnummer” an das Gerät. Die in der
SMS eingetragene Telefonnummer ist das authorisiert. Sie erhalten dann zur Bestätigung folgende SMS
“admin ok!”.
5.6.3 Um eine Authorisierung zu löschen schicke Sie diese SMS an das Gerät
noadmin+”Passwort”+Leerzeichen+”authorisierte Telefonnummer”.
5.6.4 Beachten Sie, dass Sie ihre Ländervorwahl (0049 oder +49) vor Ihre Telfonnummer setzen müssen.
Beispiel: Für die Nummer 0123456789 müssen Sie 0049123456789 schreiben.
5.7 Echtzeit-Anfrage
5.7.1 Sollten Sie das Gerät mit einer nichtauthrisierten Nummer anrufen erhalten Sie nur eine Geo-
Information zurück. Wenn Sie schon eine authorisierte Nummer festgelegt haben erhalten Sie keine
Information zurück.
5.7.2 Wenn Sie mit einern authorisierten Nummer anrufen, erhalten Sie folgende Echtzeit-Geo-Info:
*Die SMS gibt die geortete Position in Längen- und Breitengrad
(lat./long.) an. Wenn die Batterie des Gerätes schwach ist kann
es zu Ortungsfehlern kommen und die falsche Position wird
übermittelt.
7
5.8 Ausgabe von Straßennamen / Adresse
5.8.1 Falls Sie einen Benutzernamen und ein Passwort für GPRS benötigen, müssen Sie bevor Sie diese
Funktion nutzen einen APN für Ihre SIM Karte erstellen. Siehe Punkt 5.19.1 und 5.19.2.
5.8.2 Nachdem Sie dieses eingerichtet haben, senden Sie address+“Passwort“ per SMS, Ihnen wird dann
eine SMS mit der Adresse zurückgesendet.
5.9 Auto Track
Sendet die Geoinformation in einem Intervall alle 30 Sekunden zu 5 der Authorisierten Telefonnumern:
5.9.1 Einstellen: Senden Sie folgende SMS t030s005n+”Passwort” an das Gerät und das Gerät wird Ihnen
5mal im 30 Sekunden Takt die Position übermitteln. Um andere Intervalle einzustellen, können Sie die Zeit
ändern (s:Sekunden, m:Minuten, h: Stunden) der Zahlenwert muss aus 3 Zahlen zwischen den Werten 000
und 255 liegen.
5.9.2 Senden Sie die SMS t030s***n+”Passwort” an das Gerät, bekommen Sie alle 30 Sekunden die Position
übermittelt.
5.9.3 Abbruch: Senden Sie notn+”Passwort”, um die aktuelle “Auto Track”-Funktion abzubrechen.
Achtung: Das Intervall darf nicht unter 20 Sekunden liegen.
5.10 Stimmenüberwachung
In diesem Modus können Sie das Gerät anrufen und die Geräusche (Stimmen) in der Nähe des Gerätes
mithören. (Siehe Punkt 5.10 der Anleitung.)
5.11 Moduswechsel zwischen “track” und “monitor”
5.11.1. Der Satndardmodus ist “track”.
5.11.2. Senden Sie die SMS monitor+”Passwort” an das Gerät und Sie erhalten die Antwort “monitor ok!”.
Der “monitor”-Modus ist jetzt aktiv.
5.11.3. Senden Sie die SMS tracker+”Passwort” an das Gerät und Sie erhalten die Antwort “tracker ok!”. Der
“track”-Modus ist jetzt aktiv.
5.12 Speicher
5.12.1 Autom. Speichern: Sollte das Gerät kein GSM-Signal oder keinen GPRS-Empfang haben, speichert es
je nach Einstellung automatisch die Position. Die Daten werden automatisch an die authorisierte Nummer
oder den Internetserver übertragen. Die Daten sollten jedoch mitels SMS übertragen werden.
5.12.2 Zeitgesteuertes Speichern: Senden Sie z.B. save030s005n+“Passwort“ an den Tracker, der Tracker
antwortet mit save ok“ und es wird die Position 5 mal alle 30 Sekunden gespeichert (s:Sekunden,
m:Minuten, h: Stunden).
5.12.3 Mehrfach-Speichern: Senden Sie die SMS save030s***n+“Passwort“ un der Tracker antwortet mit
„save ok“.
5.12.4 Speicher löschen: Senden Sie die SMS clear+“Passwort“, der Tracker bestätigt mit „clear ok“ und der
Speicher wird gelöscht.
5.12.5 Speichergröße: Das Gerät kann maximal 16.000 Positionsinformationen speichern. Diese
Informationen können Sie mittels USB-Anschluss auf Ihren Computer übertragen.
8
5.13 Datentransfer
5.13.1 Aktuelle Daten übertragen: Senden Sie die SMS load+“Passwort“, der Tracker antwortet mit „load ok“
wenn GPRS verfügbar ist. Falls nicht erhalten Sie die Antwort „load fail“. Kontrollieren Sie dann die GPRS-
Empfang und Einstellungen.
5.13.2 Spezielle Daten übertragen: Senden Sie die SMS load+Passwort“+Leerzeichen+“Jahr Monat Tag“,
Sie erhalten die Antwort „load ok“ und die Daten der gewünschten Zeit werden an die Überwachungs-
plattform übertragen. Beispiel: SMS load“Passwort“ 20110425 für den 25 April 2011.
5.14 Geo-Gitter
Setzen Sie ein Geo-Gitter, um einen Bereich festzulegen indem sich das Gerät bewegen darf. Verlässt das
Gerät den voreingestellten Bereich, werden die authorisierten Telefonnummern per SMS benachrichtigt.
5.14.1 Einstellen: Das Gerät darf seine Position für 3-10 Minuten nicht verändern. Senden Sie dann folgende
SMS stockade+”Passwort”+Leerzeichen+”latitude,longitude”; “latitude,longitude” an das Gerät, um den
Bereich festzulegen. Sollte das Gerät diesen Bereich verlassen die Nachricht “stockade!+geo-info”an die
authorisierte Telfeonnummer gesandt.
Achtung: Das erste “latitude&longitude” ist die oberer linke Ecke des Geo-Gitters; das zweite
“latitude&longitude” ist die untere, rechte Ecke. Der Alarm wird nur einmal gesendet.
5.14.2 Abbrechen: Senden Sie die SMS nostockade+”Passwort”, um diese Funktion zu deaktivieren. Die
Funktion deaktiviert sich nach einem Alarm automatisch.
5.15 Bewegungsalarm
5.15.1 Einstellen: Das Gerät darf seine Position für 3-10 Minuten nicht verändern. Senden Sie dann folgende
SMS move+”Passwort” an das Gerät und Sie erhalten zur Bestätigung folgenden SMS “move ok!”.Wenn sich
jetzt das Gerät bewegt (Standarddistanz mehr als 200m), wird eine SMS mit dem Text “Move” zusammen
mit dem Geo-Informationen an die authorisierten Nummern gesendet. Der Alarm wird nur einmal gesendet.
5.15.2 Abbrechen: Senden Sie die SMS nomove+”Passwort”, um diese Funktion zu deaktivieren. Die
Funktion deaktiviert sich nach einem Alarm automatisch.
5.16 Geschwindigkeitsalarm:
5.16.1 Einstellen: Senden Sie die SMS speed+”Passwort”+Leerzeichen+080 an das Gerät (wenn Sie die
Geschwindigkeit auf 80km/h festelgen wollen). Sie erhalten die Antwort “speed ok!”. Wenn Sich das Gerät
schneller als 80 km/h bewegt, erhalten Sie die SMS speed+080!+Geo-Infos. Der Alarm wird nur einmal
gesendet.
5.16.2 Abbrechen: Senden Sie die SMS nospeed+”Passwort”, um diesen Alarm zu deaktivieren.
Achtung: Setzen Sie den Alarm nicht unter 50km/h. Da bei geringeren Geschwindigkeiten die Messung durch
ein schwankendes GPS-Signal, Wolken, usw. verfälscht werden kann.
5.17 SOS Knopf
Drücken Sie SOS für 3 Sekunden und die SMS “help me !+ Geo-Information” wird an alle authorisierten
Nummern alle 3 Minuten gesandt. Um diesen Vorgang abzubrechen schicken Sie folgenden SMS “help me!”
an das Gerät.
5.18 Batteriewarner
Sollte die Batteriespannung unter 3.7V fallen, werden Sie mit folgender SMS alle 3 Minuten benachrichtigt.
SMS format: low battery+Geo-Information
9
5.19 Statusprüfung
Senden Sie die SMS check+“Passwort“ und Sie werden über den aktuellen Tracker-Status per SMS
informiert. GSM:100% GPS:OK/NO GPRS:ON/OFF Battery:100%
5.20 IMEI Check:
Senden Sie die SMS imei+”Passwort” an das Gerät und Ihnen wird die 15-stellige IMEI als SMS zugesandt.
5.21 Zeit ändern
5.21.1 Senden Sie die SMS “time+Leerzeichen+zone123456+Leerzeichen+”Zeitzone”, um die Zeit zu
ändern. Beispiel “time+Leerzeichen+zone123456+Leerzeichen+ 1” (1: Zeitzone von Deutschland).
5.22 GPRS einstellen
Sie können die Einstellungen von IP, Port und APN per SMS oder Software vor der Inbetriebnahme von
GPRS vornehmen.
5.22.1 APN (Zugangspunkt) einstellen
5.22.1.1 Die APN-Standards variieren von Land zu Land. Informieren Sie sich bei Ihrem Mobilfunkanbieter
über die bei Ihnen Gültigen.
5.22.1.2 Senden Sie “APN123456 + Leerzeichen + “ihr APN” und Sie erhalten die Bestätigung “APN OK”.
5.22.1.3 Beispiel: Seden Sie “APN123456 CMNET”. Wenn erfolgreich erhalten sie die Bestätigung “APN OK”.
Notiz: 123456 steht für ihr Passwort und CMNET für den APN-Betreiber in China.
5.22.2 GPRS: Benutzer ID und Password einstellen
5.22.2.1 In den meisten Ländern muss man sich mit Benutzer ID und Passwort bei GPRS anmelden,
anderfall wird keine Verbindung hergestellt.
5.22.2.2 Senden Sie folgende SMS “up+”Passwort”+Leerzeichen+”Benutzer ID”+Leerzeichen+”GPRS
Passwort” uns Sie erhalten die Bestätigung “user,password ok”.
5.22.2.3 Beispiel: SMS “up123456 jonnes 666666”, wenn Ihre ID “jonnes” und Ihr GPRS-Passwort “666666”
ist.
5.22.3 IP und Port einstellen
5.22.3.1. Senden Sie folgende SMS: adminip + “Passwort” + Leerzeichen + IP Addresse + Leerzeichen +
Port-Nummer. Falls es geklappt hat, erhalten Sie die SMS “adminip OK”.
5.22.3.2 Beispiel: SMS “adminip123456 202.105.135.50 9000”, wenn Ihre IP 202.105.135.50 und die Port-
Nummer 9000 ist.
5.23 Moduswechsel zwischen “SMS” und “GPRS
5.23.1 Der Standardmodus ist “SMS”.
5.23.2 Sendes Sie die SMS GPRS+”Passwort an das Gerät, um in den GPRS-Modus zu wechseln. Das Gerät
schickt die Bestätigung “GPRS ok!”.
5.23.3 Senden Sie die SMS SMS+”Passwort”, das Gerät schickt die “SMS ok!” und wechselt in den SMS-
Modus.
5.24 Anleitung der Online- bzw. PC-Überwachungssoftware -> Siehe Softwareanleitung
10
6 Vorsicht
Bitte halten Sie sich an folgende Anweisungen, um die Lebensdauer des Gerätes zu verlängern:
1.Halten Sie das Gerät trocken. Flüssigkeiten können die Elektronik zerstören.
2.Benutzen oder lagern Sie das Gerät nie am staubigen Orten.
3. Benutzen Sie das Gerät nie an zu heißen oder zu kalten Orten.
4. Behandeln Sie das Gerät sorgsam. Setzen Sie es keinen Vibrationen oder Schlägen aus.
5. Reinigen Sie das Gerät nur mit einem trockenen Tuch. Benutzen Sie keine Reinigungsmittel, Chemikalien
oder Lösungsmittel.
6. Lackieren Sie das Gerät nicht. Dies kann die Funktion beeinträchtigen.
7. Nehmen Sie das Gerät nicht auseinander.
8. Nutzen Sie nur vom Hersteller empfohlene Batterien und Ladegeräte.
7 Problembehebung
Fehler
Lösung
Startet nicht
Kontrollieren Sie die Batterie, ob diese geladen und richtig eingesetzt ist.
Legt eingehende Anrufe
nicht auf
Eine unauthorisierte Nummer hat das Gerät angerufen, obwohl eine
authorisierte Nummer festgelegt wurde. Bitte setztenh Sie das Gerät zurück
und legen Sie die Nummer fest.
Keine Überwachung
Ist eine authoriserte Nummer festgelegt? Ist das Gerät so angebracht, dass
es Signale senden kann?
of signals.
11
SICHERHEITSHINWEISE UND GEWÄHRLEISTUNG
Diese Bedienungsanleitung dient dazu, Sie mit der Funktionsweise dieses Produktes vertraut zu
machen. Bewahren Sie diese Anleitung daher stets gut auf, damit Sie jederzeit darauf zugreifen
können.
Sie erhalten bei Kauf dieses Produktes zwei Jahre Gewährleistung auf Defekt bei sachgemäßem
Gebrauch.
Bitte verwenden Sie das Produkt nur in seiner bestimmungsgemäßen Art und Weise. Eine
anderweitige Verwendung führt eventuell zu Beschädigungen am Produkt oder in der Umgebung des
Produktes.
Ein Umbauen oder Verändern des Produktes beeinträchtigt die Produktsicherheit. Achtung
Verletzungsgefahr!
Öffnen Sie das Produkt niemals eigenmächtig und führen Sie Reparaturen nie selber aus!
Behandeln Sie das Produkt sorgfältig. Es kann durch Stöße, Schläge oder den Fall aus bereits
geringer Höhe beschädigt werden.
Halten Sie das Produkt fern von Feuchtigkeit und extremer Hitze.
ACHTUNG:
Es wird keine Haftung für Folgeschäden übernommen. Technische Änderungen und Irrtümer
vorbehalten!
Wichtige Hinweise zur Entsorgung
Dieses Elektrogerät gehört NICHT in den Hausmüll. Für die fachgerechte Entsorgung wenden Sie sich bitte
an die öffentlichen Sammelstellen in Ihrer Gemeinde.
Einzelheiten zum Standort einer solchen Sammelstelle und über ggf. vorhandene Mengenbeschränkungen
pro Tag/ Monat/ Jahr sowie über etwa anfallende Kosten bei Abholung entnehmen Sie bitte den
Informationen der jeweiligen Gemeinde.
Hinweise zur Batterieentsorgung
Batterien dürfen nicht in den Hausmüll gegeben werden. Als Endverbraucher sind
Sie zur Rückgabe gebrauchter Batterien gesetzlich verpflichtet. Sie können
Batterien nach Gebrauch in der Verkaufsstelle oder deren unmittelbarer Nähe
(z.B. in kommunalen Sammelstellen oder im Handel) unentgeltlich zurückgeben.
Sie können Batterien auch per Post an uns zurücksenden.
Batterien oder Akkus, die Schadstoffe enthalten, sind mit dem Symbol einer
durchgekreuzten Mülltonne gekennzeichnet, wie das oben stehende Symbol.
In der Nähe zum Mülltonnensymbol befindet sich die chemische Bezeichnung des Schadstoffes. »Cd« steht
für Cadmium, »Pb« für Blei und »Hg« für Quecksilber.
Viel Spaß mit unserem Produkt.
Warnhinweise
Reparaturen am Gerät sollten nur von einer autorisierten Fachwerkstatt durchgeführt werden.
Öffnen Sie in keinem Fall das Gerät.
Falscher Zusammenbau führt möglicherweise zu Fehlfunktionen oder dem Totalausfall.
Das Gerät sollte vor jeglichen Feuchtigkeit und direkter Sonneneinstrahlung geschützt werden.
Das Gerät bitte nicht mit Reinigungsmitteln reinigen.
Verwenden Sie zur Reinigung nur ein trockenes (Mikrofaser) Tuch.
Schließen Sie das Gerät nur an die dafür vorgesehene Netzspannung.
Schließen Sie das Gerät in keinem Fall an andere Spannungen als vorgesehen an.
Die Gewährleistung verfällt bei Fremdeingriffen in das Gerät.
12
1. Summary
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any
remote targets by SMS or internet.
2 Applications
Vehicle rental / Fleet management etc
Powerful magnet&water proof, adsorbing in the hidden place of car.
Protect child / the old / the disabled / pet etc
Provide peace-of-mind for businessmen
3 Hardware Description
3.1 Front face 3.2 Rear face
3.3 Side face
3.4 Bottom face
3.5 Interior
7
You can update software,
charge battery from here.
SOS Button
Indicator for signals.
Built-in GSM/GPRS
antennas is inside
Microphon
e
GSM Card Slot
ON /OFF Button
Install the battery like this
13
4 Specs.
Content
Specs.
Dim.
64mm x 46mm x 17mm(1.8”*2.5”*0.65”)
Weight
50g
Network
GSM/GPRS
Band
850/900/1800/1900Mhz
GPS chip
SIRF3 chip
GPS sensitivity
-159dBm
GPS accuracy
5m
Time To First Fix
Cold status 45s
Warm status 35s
Hot status 1s
Car charger
1224V input
5V output
Wall charger
110220V input
5V output
Battery
Chargeable changeable 3.7V 800mAh Li-ion battery
Standby
80hours
Storage Temp.
-40°C to +85°C
Operation Temp.
-20°C to +55°C
Humidity
5%--95% non-condensing
14
5 Usage
5.1 SIM card installation
Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in
Text format, can’t be identified for PDU format.
Steps:
1 Open the rear cover, and pick out the battery.
2 Push the foil along and turn it left.
3 Put the SIM card into the holder, and turn the foil right and fasten it in place.
5.2 Battery and Charger
Do charge the battery to capacity in 8 -12 hours for first use. Please use the battery and charger provided
by the manufacturer. This unit adopts built-in Li-ion battery, and full battery will support around 80 hours
use on end. After first use, the battery can be charged fully in 3-5hours.
Cautions:
a: For its Li-ion battery, which contains harmful chemicals and may burst, please dont bump, puncture it
violently and keep it off fire.
b: Please charge the battery in time to keep it working normally.
5.3 Startup
Put the SIM card and battery in place.
Turn on the unit outdoors by pressing the on/off button until the indicator is on.
For first use, please initialize the unit and restore it to default setting. (Please refer to 5.4 for
instruction.)
In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals.
The indicator will keep flashing every 4 seconds when the unit has received the signals, otherwise it will
keep on.
When this unit receives GPS signals normally, you can use it and do all the following settings.
15
5.4 Initialization
Send begin+password in SMS to the unit, it will reply begin ok and initialize all the settings. (Default
password: 123456)
For example, send SMS begin123456 to the tracker via a cell phone, If succeeded,
“begin OK” is returned by the device in SMS. If there is something wrong then SMS “begin fail” is received,
check out the format of commands sent and password as well.
Attention, begin+123456,the symbol+ in the following, please don't add + in
SMS, only begin123456 in SMS. This description is only for quick understand.
same argument, “space” not the word space, it means press the spacebar button.
5.5 Change the password
Send SMS password+old password+space+new password to change the password.
Remark:
5.5.1 Be sure keep the new password in mind, you have to upload the software to restore the original
setting in case of losing the new password.
5.5.2 Make sure the new password is in 6 digits, or else the tracker can not recognize the password.
5.6 Authorization
There are only 5 numbers able to be authorized.
5.6.1 Call the tracker for 10 times, it will make the cell phone number as the authorized number
automatically.
5.6.2 Send SMS admin+password+space+cell phone number to set up a authorized number. The other
authorized numbers should be set by the first authorized number. If the number is successfully authorized,
the unit will reply admin ok! in SMS.
5.6.3 Send SMS noadmin+password+space+authorized number to delete the authorized number.
5.6.4 For roaming purpose, you have to add your country code ahead of the cell phone number, for
example, please send admin123456 008613322221111 to tracker to set 13322221111 as an authorized
number.
5.7 Real-time polling
5.7.1 If there is no authorized number, when any number dials up the unit, it will report a Geo-info; If there
is already an authorized number, then it will not respond when an unauthorized number calls it up.
5.7.2 When an authorized number dials up the unit, it will hang up and report a real-time Geo-info as below:
*Tracking location, the SMS information about the lat./long. Received
is the place received the GPS signal when the GPS signal is weak.
Please check the time received the SMS if there are some errors of
the location.
16
5.8 Get location in real street/address name
5.8.1 You must set up the APN of your local GSM network for the SIM card in tracker first before using this
function, if there is user name and password for GPRS login, Please refer to 5.19.1 and 5.19.2 to configure
the APN, user name and password for GPRS login.
5.8.2 After configure the APN, send address+password to device, it will reply SMS including real
street/address name. For example: No.113, Nantou Guankou 2nd Rd. Nanshan district, Shenzhen,
Guangdong, china.
5.9 Auto Track
Report a Geo-info at 30s intervals to the authorized numbers for 5 times:
5.9.1 Send SMS command “fix030s005n +password” to the tracker device, it will report the Geo-info at 30s
intervals for 5 times. (s:second, m:minute, h:hour). This command set must be in 3 digits and the maximum
value is 255.
5.9.2 Send SMS “fix030s***n+password” to the tracker device, it will reply the Geo-info continuously at 30
seconds intervals.
5.9.3 Cancellation: Send SMS “nofix+password” to the tracker device to cancel the “auto track”.
Note: the interval must not less than 20s.
5.10 Voice Surveillance
In this mode, the user can dial up the unit to monitor the voice (please refer to 5.10 for instruction).
5.11 Modes switch between track and monitor
5.11.1. The default mode is “track”.
5.11.2. Send SMS monitor+password to the unit, and it will reply “monitor ok!” and switch to “monitor
mode.
5.11.3. Send SMS tracker+password to the unit, it will reply “tracker ok!” and restore to “track” mode.
5.12 Storage
5.12.1 Auto StorageWhen the tracker devices lost GSM signals or fall offline from GPRS, tracker will store
the tracking position and alerts automatically in the flash upon the pre-set condition, when GSM signals get
back, all the event alerts will be auto-sent to the authorized numbers or monitoring platform (server), but
the stored tracking data should be loaded to the monitoring platform via SMS command.
5.12.2 Storage upon times: Send SMS: save030s005n+password to the tracker unit, it will reply save ok,
and will store the lat, long locations every 30 seconds for 5 times. (S: second, m: minute; h: hour).
5.12.3 Multi-StorageSend sms:save030s***n+ password to tracker device, it will reply save ok.
5.12.4: Storage Clearance: send SMS: clear+ password to tracker device, it will reply clear ok.
5.12.5Storage Volume: The Max Storage of the memory can store 16,000 tracking locations, and can be
copy to computers directly through the USB cable.
17
5.13 Data Load
5.13.1 Current date Load: Send SMS: load+ password to tracker device, it will reply: load ok if the device
is working well under GPRS mode; if not, it will reply load fail! Please check gprs that means device does
not work under GPRS mode.
5.13.2 Specified date Load Send SMS: “load+ password+ space+ year month date to tracker device, it
will reply: “load ok and load the tracking data to the monitoring platform upon the valid time you choose.
For Example: send SMS: load123456 20110425 to the tracker device, means to load the tracking data of
25th April 2011 to monitoring platform.
5.14 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to
the authorized numbers when it breaches the district.
5.14.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS
stockade+password+space+latitude,longitude; latitude,longitude to unit to set the restricted district. In case
of breach, it will send SMS “stockade!+geo-info” to the authorized numbers.
Remark: The first latitude&longitude is coordinate of the top left corner of the Geo-fence, while the second
latitude&longitude is the coordinate of the bottom right corner. It will alarm one time in each setting.
5.14.2 Cancel: Send SMS nostockade+password to deactivate this function.
This function will be out of effect after the unit moves outside the district.
5.15 Movement alert
5.15.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS
move+password to the unit, then the unit will reply “move ok!”. In case of such a movementthe unit
default distance is 200M, it will send SMS Move along with a Geo-info to the authorized numbers. It will
alarm one time in each setting.
5.15.2 Cancel: Send SMS nomove+password to deactivate the movement alert.
Remark: This function will be out of effect after the unit moves outside the district.
5.16 Overspeed alert:
5.16.1 Set up: Send SMS speed+password+space+080 to the unit (suppose the speed is 80km/h), and it
will reply speed ok!. When the target moves exceeding 80 km/h, the unit will send SMS speed+080!+Geo-
info to the authorized numbers. It will alarm one time in each setting.
5.16.2 Cancel: Send SMS nospeed+password to deactivate the overspeed alert
Remark: It is recommended that the speed alarm is set at not less than 50km/h. For below that rate, it may
cause the excursion of the GPS signal influenced by clouds etc.
5.17 SOS button
Press the SOS for 3 seconds, it will send “help me!+ Geo-info” to all the authorized numbers every 3
minutes. It will stop sending such a SMS when any authorized number reply SMS “help me!” to the tracker.
5.18 Low battery alert
It begins to alert when it is 3.7V and sends you SMS in 3m interval.
SMS format: low battery+Geo-info.
18
5.19 State Checking
Send SMS:check+password to the tracker device, it will reply the recent status via SMS as: GSM: 100%
GPS: OK/NO GPRS: ON/OFF battery: 100%.
5.20 IMEI checking:
Send SMS command "imei+password" to the unit. E.g.: Send SMS command "imei123456" to the unit, an
IMEI number in 15 digits will be returned to your cell phone.
5.21 Terminal (local) Time Setting
5.20.1 Send SMS “time+space+zone123456+space+local time zone”.
For example, Send SMS“time+space+zone123456+space+ 8” (time zone of China).
If the local time zone is negative as -8, then it should set as SMS:
“time zone123456 -8.
5.21 GPRS setting
User must send SMS via cell phone to set up IP, port and APN before starting GPRS.
5.21.1 Setting up APN
5.21.1.1 APN standards for Access Point Name and differs from country to country. For more information
about the local APN, inquire with your local GPRS network operator.
5.21.1.2 Text the tracker a SMS “APN123456 + Space + your local APN” via a cell phone and if succeeded in
setup, the tracker will return the message “APN OK”.
5.21.1.3 e.g. send SMS command APN123456 CMNET”. If succeeded, “APN OK” is returned by the tracker
in SMS.
Notes: 123456 refer to password of tracker and CMNET is the APN of China Mobile (One of GSM Operator in
china).
5.21.2 GPRS User ID and password Setup
5.21.2.1 In most countries, the user name and password involving GPRS login are not compulsorily
necessary, therefore, the entry can be skipped. For those countries requiring user name and password,
please configure as following:
5.21.2.2 Send SMS up+123456+space+user+space+passwordIf succeeded, user,password ok is
returned by the tracker in SMS.
5.21.2.3 For instance, send SMS up123456 jonnes 666666 to the tracker, and if succeeded, the tracker
returns user, password OK
5.22.3 IP and port setup
5.22.3.1. Send SMS as below via a cell phone: admin ip + 123456 + Space + IP Address + Space + Port
Number. If succeeded, “admin ip OK” is returned by the device in SMS.
5.22.3.2 e.g, Send SMS command adminip123456 202.104.150.75 9000” to the tracker device, If
succeeded, “admin ip OK” is returned by the device in SMS.( 123456 is default password202.104.150.75 is
IP9000 is port).
19
5.23 Modes switch between SMS and GPRS
5.23.1 The default mode is SMS
5.23.2 Send SMS GPRS+password” to the unit, and it will reply “GPRS ok!” and switch to “GPRS mode.
5.23.3 Send SMS SMS+password” to the unit, it will reply “SMS ok!” and restore to “SMS” mode.
5.24 User manual of web based and PC installation monitor software includes in the CD in the package box.
[Software Platform User Manual]
6 Cautions
Please comply with the instructions to extend the unit life:
1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.
2. Dont use & store the unit in dusty places.
3. Dont put the unit in overheated or overcooled places.
4. Handle carefully. Dont vibrate or shake it violently.
5. Clear the unit with a piece of dry cloth. Dont clean in chemicals, detergent.
6. Dont paint the unit, this may cause some foreign materials left in between the parts.
7. Dont disassemble or refit the unit.
8. Please use the battery and charger provided by manufacturer. Using other batteries and chargers will
cause unwanted situation.
7 Faults & The solutions
Faults
Solution
Startup Fail
Check the battery and see if it is fully charged or
correctly installed.
Hangup Fail
In existence of an authorized number, an unauthorized
number dials up the unit. Please initialize the unit and re-set up
the authorized numbers.
No GSM Signals
Please make sure SIM Card is GSM Net and installed correctly; also call
display should be on; but no call transfer and PIN code off.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chal-Tec 10001375 GPS Tracker 102-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chal-Tec 10001375 GPS Tracker 102-B in the language / languages: English, German as an attachment in your email.

The manual is 1.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info