776545
17
Zoom out
Zoom in
Previous page
1/19
Next page
17
5.13 Data Load
5.13.1 Current date Load: Send SMS: load+ password to tracker device, it will reply: load ok if the device
is working well under GPRS mode; if not, it will reply load fail! Please check gprs that means device does
not work under GPRS mode.
5.13.2 Specified date Load Send SMS: “load+ password+ space+ year month date to tracker device, it
will reply: “load ok and load the tracking data to the monitoring platform upon the valid time you choose.
For Example: send SMS: load123456 20110425 to the tracker device, means to load the tracking data of
25th April 2011 to monitoring platform.
5.14 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to
the authorized numbers when it breaches the district.
5.14.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS
stockade+password+space+latitude,longitude; latitude,longitude to unit to set the restricted district. In case
of breach, it will send SMS “stockade!+geo-info” to the authorized numbers.
Remark: The first latitude&longitude is coordinate of the top left corner of the Geo-fence, while the second
latitude&longitude is the coordinate of the bottom right corner. It will alarm one time in each setting.
5.14.2 Cancel: Send SMS nostockade+password to deactivate this function.
This function will be out of effect after the unit moves outside the district.
5.15 Movement alert
5.15.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS
move+password to the unit, then the unit will reply “move ok!”. In case of such a movementthe unit
default distance is 200M, it will send SMS Move along with a Geo-info to the authorized numbers. It will
alarm one time in each setting.
5.15.2 Cancel: Send SMS nomove+password to deactivate the movement alert.
Remark: This function will be out of effect after the unit moves outside the district.
5.16 Overspeed alert:
5.16.1 Set up: Send SMS speed+password+space+080 to the unit (suppose the speed is 80km/h), and it
will reply speed ok!. When the target moves exceeding 80 km/h, the unit will send SMS speed+080!+Geo-
info to the authorized numbers. It will alarm one time in each setting.
5.16.2 Cancel: Send SMS nospeed+password to deactivate the overspeed alert
Remark: It is recommended that the speed alarm is set at not less than 50km/h. For below that rate, it may
cause the excursion of the GPS signal influenced by clouds etc.
5.17 SOS button
Press the SOS for 3 seconds, it will send “help me!+ Geo-info” to all the authorized numbers every 3
minutes. It will stop sending such a SMS when any authorized number reply SMS “help me!” to the tracker.
5.18 Low battery alert
It begins to alert when it is 3.7V and sends you SMS in 3m interval.
SMS format: low battery+Geo-info.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chal-Tec 10001375 GPS Tracker 102-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chal-Tec 10001375 GPS Tracker 102-B in the language / languages: English, German as an attachment in your email.

The manual is 1.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info