Manual Cervelo S3 RIM - 2019 (page 59 of 196) (English, German, Dutch, French, Italian, Spanish)

780073

Zoom out

Zoom in

1/196

The battery for your Shimano Di2 system mounts inside

the down tube using the Internal Battery Mount (MT-BINT)

designed to  t this frame. As this is a sealed location, it is

important to test the system prior to  nal installation.

Insert a long 5mm hex key into the

lower end of the holder to work as an

insertion tool.

Pass the battery and holder assembly

through the opening in the bottom bracket

shell and position it, in the down tube, so

that the  xing nuts are located over the

mounting holes.

Press the two M3  xing nuts

into the holder through the

upper holes. Attach battery

to mount using two zip ties,

and install.

Ensure Loctite 242 is applied to the M3

 xing screws. Pass through the mounting

holes to catch the  xing nuts in the battery

holder, tightening only slightly to hold in

place. Remove 5mm hex key. Using 2mm

hex key, tighten  xing screws to maximum

of 2.5Nm over the mounting holes.

M3 x 16mm screws

DI2 BATTERY INSTALLATION

Brake

Rear Shifter

Front Shifter

HANDLEBAR CABLE ROUTING – MECHANICAL

1. Install shifters on handlebar.

2. Place brake housing and E-Wires in the

appropriate channels of the handlebar. (note

that brake housing should exit the channel

before the stem).

3. Attach handlebar to stem, and attach brake

and shifting controls as per manufacturer's

instructions.

Tighten stem faceplate

bolts to 6Nm.

Brake housing should

exit the channel on the

underside of the handlebar

before the stem.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cervelo S3 RIM - 2019 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 44.34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cervelo S3 RIM - 2019 Manual

Product: