666997
8
Zoom out
Zoom in
Previous page
1/32
Next page
Attaching the Telescope to the Fork Arm
Your telescope optical tube has a built on dovetail mounting bar
used to attach the tube to the fork arm. To attach the telescope
tube (See gure 2-5).
1. Loosen the tube clamp tightening knob.
2. Slide the dovetail mounting bar of the telescope tube into
the fork arm clamp until it touches the positioning stop.
Make sure that the logo on the side of the tube is right side
up when the tube is aligned with the fork arm.
3. Tighten the tube clamp knob by hand to secure the tube to
the fork arm.
Your SkyProdigy is fully assembled and is ready to attach the
accessories.
The Star Diagonal
The star diagonal diverts light at a right angle from the light path
of the telescope. For astronomical observing, this allows you to ob-
serve in positions that are more comfortable than if you were to look
straight through. To attach the star diagonal:
1. Turn the thumbscrew on the eyepiece adapter at the end of
the focuser barrel until it no longer extends into (i.e.,
obstructs) the inner diameter of the focus barrel/ visual back.
Remove the protective dust cap from the focus barrel/ visual
back.
2. Slide the chrome portion of the star diagonal into the eye
piece adapter.
3. Tighten the thumbscrew on the focus barrel/ visual back to
hold the star diagonal in place.
If you wish to change the orientation of the star diagonal, loosen
the thumbscrew on the eyepiece adapter until the star diagonal
rotates freely. Rotate the diagonal to the desired position and
tighten the thumbscrew.
The Eyepiece
The eyepiece, is the optical element that magnies the image fo-
cused by the telescope. To install the eyepiece:
1. Loosen the thumbscrew on the star diagonal so it does
not obstruct the inner diameter of the eyepiece end of the
diagonal.
2. Remove the protective dust cap from the star diagonals
barrel.
3. Slide the chrome portion of the low power 25 mm eyepiece
into the star diagonal.
4. Tighten the thumbscrew to hold the eyepiece in place.
To remove the eyepiece, loosen the thumbscrew on the star
diagonal and slide the eyepiece out.
8
FIGURE 2-5
Dovetail
Mounting Bar
Tube Clamp
Tightening Knob
FIGURE 2-6
VISUAL ACCESSORIES FOR SKYPRODIGY 102
Star
Diagonal
StarPointer
Finderscope
Focus Knob
Eyepiece
FIGURE 2-7
VISUAL ACCESSORIES FOR SKYPRODIGY 6
Star
Diagonal
StarPointer
Finderscope
Focus Knob
Eyepiece
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron SkyProdigy 6 - 11076 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron SkyProdigy 6 - 11076 in the language / languages: English as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info