667030
6
Zoom out
Zoom in
Previous page
1/50
Next page
4
>> www.celestron.com

The CPC DeluxeHD telescope comes completely pre-assembled and can be operational in a matter of minutes. The CPC and its accessories are
conveniently packaged in one reusable shipping carton while the tripod comes in its own box. Included with your telescope are the following:
#11007 #11008 #11009
CPC Deluxe 800 HD CPC Deluxe 925 HD CPC Deluxe 1100 HD
Diameter 203 mm (8”) Edge HD Optics 235 mm (9.25”) Edge HD Optics 280 mm (11”) Edge HD Optics
Focal Length 2032 mm f/10 2350 mm f/10 2800 mm f/10
Eyepiece 40 mm - 1.25” (51x) 23 mm - 2” (102x) 23 mm - 2” (122x)
Finderscope 9x50 9x50 9x50
Diagonal 90° - 1.25” 90° - 2” with 1.25” adapter 90° - 2” with 1.25” adapter
Mount CPC Altazimuth CPC Altazimuth CPC Altazimuth
Tripod 2” Stainless Steel 2” Stainless Steel 2” Stainless Steel
NexRemote Telescope Control NexRemote Telescope Control NexRemote Telescope Control
Software Software with RS-232 cable Software with RS-232 cable Software with RS-232 cable
Power Car Battery Adapter Car Battery Adapter Car Battery Adapter
Setting up the Tripod
For maximum rigidity, the Celestron heavy duty tripod has a leg support
bracket/accessory tray. This bracket ts snugly against the tripod legs,
increasing stability while reducing vibration and exure. However, the
tripod must be shipped with the leg support bracket detached so the
tripod legs can collapse. To set up the tripod:
1. Hold the tripod with the head up and the legs pointed toward
the ground.
2. Pull the legs away from the central column until they will not separate
any further. The top of each tripod leg presses against the tripod head
to indicate maximum separation.
3. Remove the tension knob, located on the central column. See gure 3-1.
4. Place the leg support bracket over the central rod so that the cups on
the end of each bracket are directly underneath each leg.
5. Rotate the tension knob until the bracket is secure against the tripod
legs. 
The tripod will now stand by itself. Once the telescope is attached to the
tripod, readjust the tension knob to ensure that the leg support bracket
is snug. Once again, do not over tighten!
Start by removing the telescope and tripod from their shipping cartons
and set the telescope’s round base on a sturdy at surface. Always
carry the telescope by holding it from the lower portion of the fork arm
on the hand control side and from the handle on the opposite side.
Remove all of the accessories from their individual boxes. Remember
to save all of the containers so that they can be used to transport the
telescope. Before attaching the visual accessories, the telescope should
be mounted on the tripod and the tube should be positioned horizontal
to the ground.
>>












6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron CPC Deluxe 800 HD - 11007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron CPC Deluxe 800 HD - 11007 in the language / languages: English as an attachment in your email.

The manual is 10,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info