Manual Celestron 47005 (page 2 of 15) (English, German, French, Italian, Spanish)

791750

Zoom out

Zoom in

1/15

If the battery power becomes low on the Sensor, a “low battery icon” will appear on the LCD display

and change batteries to ensure a strong signal is being sent to the Receiver.

Settings and Operation of the Receiver

y Indoor & Outdoor Temperature & Humidity – the indoor

temperature and humidity is shown on the LCD display as is the

outdoor temperature and humidity. The outdoor temperature and

humidity trends will be displayed with a small icon to the right of

each display.

y Data displayed in “C” or “F” – push the “- c/f” button (rear of

Receiver) when in a normal mode to change from “C” (Centigrade) or

“F” (Fahrenheit).

y Clock & Calendar – Press the “set” button and hold down for a

couple of seconds to enter the setup mode. Use the “+” or “-” buttons

to make changes. Press “set” after each setting is correct. The settings in

sequence will be: year / month / date / hour / minute /12-24hr format /

time zone / exit. The day of the week is indicated near the time.

y Time Zone – You can set an alternate time zone (during setup) for ±

12 hours. Once set you can access the alternate time by pressing for a

few seconds “- zone” button and doing the same to return to your

home time.

y Moon Phase – will automatically be seen on the display and will be

correct if the calendar is set to the actual.

y Max/Min Memory – in normal mode, press the button “min/max” to

see the maximum temperature and humidity both indoors and out,

press the button again to see the minimum temperature and humidity

both indoors and out, press the button again to return to the normal mode. The memory is

cleared once per day.

y Barometer & Weather Forecast – the weather station has a built-in barometer to measure

atmospheric pressure and forecasts the weather with icons for Sunny/Partly

Cloudy/Cloudy/Rainy/Stormy. The unit predicts the weather conditions for

the next 12 to 24 hours based on the atmospheric pressure change and is

about 70% correct. The company accepts no liability for any incorrect

forecast. In normal mode press and hold down the “baro/down” button on

the back of the Receiver for a few seconds so you can set how you want to

view the atmospheric pressure readings – “in/Hg” or “mb/hPa” (hold the

button down again for a few seconds to change the setting). For the

barometer to be as accurate as possible the altitude must be set for your

location and you can find out your altitude from various local sources. Press

and hold the “baro/up” button down to select and then toggle between feet

and meters. To confirm feet or meters press the “hist” button. Then, press

the “baro/up” or “baro/down” buttons to set the altitude for your location.

The pressure tendency is shown in a small icon above the forecast –

rising/steady/falling.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Celestron 47005 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Celestron 47005 Manual

Product: