666992

Celestron 21035 - Travel Scope 70 Manual

8
Zoom out
Zoom in
Previous page
1/100
Next page
8 I ENGLISH
ATTACHING THE TELESCOPE TUBE TO THE TRIPOD
The telescope optical tube attaches to the tripod by using the mounting bracket on the bottom of the optical tube and the
mounting platform of the tripod. Before starting make sure all of the knobs on the tripod are locked.
1. Remove the protective paper covering the optical tube.
2. Loosen the top right knob (figure 7) by turning it counterclockwise.
This allows you to tilt the tripod platform up 90° as shown in
figure 8. After tilting the platform up, tighten the knob to secure
it in place.
3. Figure 9 shows the bottom of the optical tube, the tripod
platform, and where they will attach to each other.
4. Under the center of the tripod platform, you will see a knob
(figure 9) that contains a ¼ x 20 screw to attach the platform to
the telescope optical tube.
5. You can put the ¼ x 20 screw into the threaded holes of the
Travel Scope 70 (it doesn’t matter which one you use) in the
mounting bracket of the telescope optical tube whereas the
Travel Scope 50 has only one threaded hole. Hold the optical
tube with one hand while threading the screw clockwise until
tight with the other hand. Now the assembly will look like
Figure 10.
6. Lastly, loosen the knob for the tripod platform and lower the
platform down to the level position. Then, tighten the knob
securely.
Fig. 7
Fig. 8
Fig. 9
Fig. 10
MOVING THE TRAVEL SCOPE MANUALLY
The Travel Scope is easy to move wherever you want to point it. The up and down (altitude) is controlled by the Pan Handle
Control Knob (figure 1). The side-to-side (azimuth) is controlled by the Azimuth Locking Knob (top left knob in Figure 7). Both
knobs are loosened when turned counterclockwise and tightened when turned clockwise. When both knobs are loose you
can find your objects easily (through the finderscope which is discussed shortly) and then lock the controls.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron 21035 - Travel Scope 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron 21035 - Travel Scope 70 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info