753590
5
Zoom out
Zoom in
Previous page
1/15
Next page
980 CONNECTED 4140
ENGLISH ENGLISH
1. PARTS AND COMPONENTS
Main body
Fig. 1.
1. Front bumper
2. Status indicator
3. Start/Pause button
4. Handle
5. Schedule button
6. Speaker
7. Rear bumper
8. Power cord
9. Edge-detection sensor
10. Front mop
11. Squeegees
12. Mop
13. Fan
14. Driving wheels
15. Suction sensor
16. Power switch
17. Direction wheel
18. Bottom status indicator
Extension cord
Fig. 2.
Remote control
Fig. 3.
1. Direction buttons
2. Start/Pause button
3. Wheels cleaning button
4. Area cleaning button
5. N Cleaning mode button
6. Z Cleaning mode button
7. Thorough cleaning button
8. Empty buttons (no function)
Box contents
1. Window-cleaning robot
2. Power adapter cord
3. Safety suction pad
4. Remote control
5. Mop cloth
6. Cleaning solution
7. Instructions manual
2. BEFORE USE
Take the product out of the box and remove all packaging material.
Make sure all parts and components are included and in good conditions. If any visible signs of
damage are observed, contact Cecotec’s Technical Support Service immediately.
The ideal thickness of the windows should be at least 5 mm. It is suggested not to use the
device on a framed window thinner than 5 mm (0.2”). Conga WinDroid 980 Connected can
clean framed or frameless glass, larger than 50 x 70 cm (19.7” x 27.6”).
Fig. 4.
If the window is covered with dirt, clean a small area no smaller than the robot’s size on the
glass before using and placing the robot there.
Fig. 5.
Please ensure there is a 13-cm (5.1”) free space between the glass and any obstacle in the
room, like curtains or furniture.
Conga WinDroid 980 Connected can clean horizontally mounted glass but only when using the
direction control buttons on the remote control.
Conga WinDroid 980 Connected can clean glass at an angle but may not operate normally; in
such case there must be a person near supervising the process in order to avoid accidents.
The robot cannot be used upside down.
It is recommended to clean the robot with the standard spray clean solution.
Attaching the mop
Fig. 5.
Turn the robot over and attach the mop to the bottom of the robot smoothly. The white side of
the mop must be attached to the part with the velcro, and the gray microfiber side faces out.
Make sure the mop does not cover the squeegees or edge-detection sensors.
Power adapter assembly
Fig. 7.
Safety cable assembly
Before using this product for cleaning a window, please install the safety cable and the other
accessories.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cecotec Conga Windroid 980 connected at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cecotec Conga Windroid 980 connected in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info