Manual Cecotec Conga 1099 (page 35 of 40) (Danish)

753586

Zoom out

Zoom in

1/40

CONGA 1090 | 35

ENGLESK

Conguration with the remote control

Press the schedule button on the remote control. Digits will start blinking.

Fig. 36

Use direction buttons to select the day. Once selected, use right and left

buttons to select minutes and hours. Use direction buttons when digits are

blinking to congure the desired minutes and hours. Press the power but-

ton to save settings. Enter the desired days and follow the same steps to

schedule them.

Fig. 37

Finally, press schedule button to exit scheduling mode. The robot will beep

once indicating the scheduled cleaning settings have been conrmed.

The user may schedule as many days per week as desired. The home screen

will display when the robot is scheduled.

Cancelling scheduled cleaning

Press the schedule button on the remote control, select the day you wish

to delete and change the set time to 00:00 am., this is the time to be set to

cancel the cleaning program.

Fig. 38.

5. Cleaning and maintenance

In order to lengthen your robot’s shelf life and to allow your robot to oper-

ate at peak performance, carry out the following procedures periodically.

Empty the robot’s dust tank.

Press the dust tank’s release button.

Fig. 39

Open the dust tank and empty it.

Fig. 40

Clean the robot’s lter.

Remove the lter.

Carefully shake o all dust from the lter.

Fig. 41

Clean the free-fall sensors

Use a clean, dry and soft cloth to wipe o any dust from the free-fall sen-

sor located on the right side of the robot’s bottom part.

Warning: Do not spray cleaning products directly on the sensor.

Fig. 42

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cecotec Conga 1099 in the language / languages: Danish as an attachment in your email.

The manual is 6,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cecotec Conga 1099 Manual

Product: